¡ Semiconductor
MSC1230
PIN DESCRIPTION
Pin
34 to 46,
52 to 56,
1 to 19
30 to 32
25
28
27
Symbol Type
Decription
SEG1 to 37 O Output pins for segment signals for driving VF display tube.
GRID1 to 3
SEL
DATA-IN
CLOCK
O Output pins for grid signals for driving VF display tube.
The GRID3 output is not used when the universal VF display tube is used.
I When at a "L" level, this pin selects 1/3-duty VF display tube.
When at a "H" level (or when used in the open state), this pin selects universal
VF display tube.
I Pin for series data input from microprocessor.
Data is input to the shift register on the rising edge of the CLOCK signal.
I Serial clock input pin.
Data is input through the DATA-IN pin at the rising edge of the serial clock.
24
OSC0
I RC oscillator connecting pins.
Connect a resistor between the OSC1 and OSC0 pins and a capacitor between
23
OSC1
O the OSC0 pin and the ground.
26
CS
I Chip select input pin. Circuit operation is valid when this pin is at a "L" level.
47
VDD1
Power supply pins. When using these pins, connect each of them to the power
51
VDD2
— supply.
29
VDD3
49
DGND
— Ground pins for driver and logic. These pins can be connected with each other
when they are used.
21
LGND
—
4/13