NCP1072STAT3G 查看數據表（PDF） - ON Semiconductor
零件编号
产品描述 (功能)
生产厂家
NCP1072STAT3G Datasheet PDF : 30 Pages
| |||
NCP1070, NCP1071, NCP1072, NCP1075, NCP1076, NCP1077
MAXIMUM RATINGS TABLE
Symbol
Rating
VCC
BVdss
Power Supply Voltage on all pins, except Pin 5(Drain)
Drain voltage
IDS(PK)
Drain current peak during transformer saturation (TJ = 150°C, Note 3):
NCP1070/71:
NCP1072/75:
NCP1076/77:
Value
Unit
−0.3 to 10
V
−0.3 to 700
V
480
mA
870
mA
2200
mA
Drain current peak during transformer saturation (TJ = 25°C, Note 3):
NCP1070/71:
NCP1072/75:
NCP1076/77:
850
mA
1500
mA
3900
mA
I_VCC
RqJ−A
Maximum Current into Pin 1 when Activating the 8.2 V Active Clamp
P Suffix, Case 626A
Junction−to−Air, 2.0 oz Printed Circuit Copper Clad
0.36 Sq. Inch
1.0 Sq. Inch
15
mA
77
°C/W
60
RqJ−A
ST Suffix, Plastic Package Case 318E
Junction−to−Air, 2.0 oz Printed Circuit Copper Clad
0.36 Sq. Inch
1.0 Sq. Inch
74
°C/W
55
TJMAX
Maximum Junction Temperature
Storage Temperature Range
150
°C
−60 to +150
°C
ESD Capability, Human Body Model (All pins except HV)
2
kV
ESD Capability, Machine Model
200
V
ESD Capability, Charged Device Model
1
kV
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. This device series contains ESD protection and exceeds the following tests:
Human Body Model 2000 V per JEDEC JESD22−A114−F
Machine Model Method 200 V per JEDEC JESD22−A115−A
Charged Device Model 1000 V per JEDEC JESD22−C101E
2. This device contains latch−up protection and exceeds 100 mA per JEDEC Standard JESD78
3. Maximum drain current IDS(PK) is obtained when the transformer saturates. It should not be mixed with short pulses that can be seen at turn
on. Figure 4 below provides spike limits the device can tolerate.
Figure 4. Spike Limits
www.onsemi.com
4
Share Link: 