NCV4275
PIN FUNCTION DESCRIPTION
Pin No.
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ 1
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ 2
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ 3
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ 4
ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ 5
Symbol
I
RO
GND
D
Q
Description
Input; Battery Supply Input Voltage. Bypass to ground with a ceramic capacitor.
Reset Output; Open Collector Active Reset (accurate when I > 1.0 V).
Ground; Pin 3 internally connected to tab.
Reset Delay; timing capacitor to GND for Reset Delay function.
Output; ±2.0%, 450 mA output. 22 mF, ESR < 5.0 Ω to ground.
MAXIMUM RATINGS†
Rating
Symbol
Min
Max
Unit
Input Voltage
VI
−42
45
V
Input Peak Transient Voltage
VI
−
45
V
Output Voltage
VQ
−1.0
16
V
Reset Output Voltage
VRO
−0.3
25
V
Reset Output Current
IRO
−5.0
5.0
mA
Reset Delay Voltage
VD
−0.3
7.0
V
Reset Delay Current
ID
−2.0
2.0
mA
Input Voltage Operating Range
VI
5.5
42
V
ESD Susceptibility −Human Body Model
−Machine Model
−
4.0
−
kV
−
200
−
V
Junction Temperature
TJ
−40
150
°C
Storage Temperature
Tstg
−55
150
°C
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values
(not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage
may occur and reliability may be affected.
LEAD TEMPERATURE SOLDERING REFLOW (Note 1)
Lead Free, 60 sec−150 sec above 217
TSLD
−
265 Peak
°C
Leaded, 60 sec−150 sec above 183
TSLD
−
240 Peak
°C
THERMAL CHARACTERISTICS
Characteristic
Test Conditions (Typical Value)
Unit
DPAK 5−PIN PACKAGE
Min Pad Board (Note 2)
1″ Pad Board (Note 3)
Junction−to−Tab (psi−JLx, yJLx)
Junction−to−Ambient (RqJA, qJA)
D2PAK 5−PIN PACKAGE
4.2
100.9
4.7
C/W
46.8
C/W
0.4 sq. in. Spreader Board (Note 4)
1.2 sq. in. Spreader Board (Note 5)
Junction−to−Tab (psi−JLx, yJLx)
3.8
4.0
C/W
Junction−to−Ambient (RqJA, qJA)
74.8
41.6
C/W
1. PRR IPC / JEDEC J−STD−020C
2. 1 oz. copper, 0.26 inch2 (168 mm2) copper area, 0.062″ thick FR4.
3. 1 oz. copper, 1.14 inch2 (736 mm2) copper area, 0.062″ thick FR4.
4. 1 oz. copper, 0.373 inch2 (241 mm2) copper area, 0.062″ thick FR4.
5. 1 oz. copper, 1.222 inch2 (788 mm2) copper area, 0.062″ thick FR4.
†During the voltage range which exceeds the maximum tested voltage of I, operation is assured, but not specified. Wider limits may apply. Thermal
dissipation must be observed closely.
http://onsemi.com
2