NJL5196K/97K
NJL5196K-F10 / NJL5197K-F10 Taping Specification
(TE1)
1. Taping size
1) Carrier tape is used with Styrene type Carbonated Plastic.
2) Cover tape is used with electro statistically prevention treated Polyester type tape.
3) Product taping direction is to place the index mark against the pull out direction of the tape as in the drawing.
2.0
4.0 φ1.5
0.3
8.0
12.0
1.8
2. Taping Strength
Carrier tape
Cover tape
Pullup the cover tape from the carrier tape, and when the opening angle comes around 10 to 15 ° , and the peeling-off
strength is to be within the power of 20 to 70g.
3. Packaging
1) The taped products are to be rolled up on the taping reel as on the drawing
2) Rolling up specification
Start rolling : Carrier tape open space more than 20 Peaces.
End of rolling : Carrier tape open space more than 20 Peaces, and 2 round of reel space at the cover tape only.
3) Taping quantity : 3,000 Pieces
4) Seal off after putting each reels in a vinyl bag with silica gel (3 bags).
Label
Thick paper
13.5
Styrofoam
19.5
-7-