NJM2883E17 查看數據表（PDF） - Japan Radio Corporation

零件编号

产品描述 (功能)

生产厂家

NJM2883E17

LOW DROPOUT VOLTAGE REGULATOR

Japan Radio Corporation  

NJM2883

TYPICAL APPLICATION

1 In case that ON/OFF Control is not required:

VIN

VIN

VOUT

0.1µF

R

(0∼300kΩ)

NJM2883

CONTROL

NOISE

BYPASS

GND

VOUT

1.0µF *4

Cp=0.01µF

*4 1.9V ≤ Vo ≤ 2.6V version: Co=2.2µF

Vo ≤ 1.8V version: Co=4.7µF

Connect control terminal to VIN terminal

The quiescent current can be reduced by using a resistance “R”. Instead, it increases the minimum operating

voltage. For further information, please refer to Figure “Output Voltage vs. Control Voltage”.

2 In use of ON/OFF CONTROL:

VIN

VIN

VOUT

VOUT

0.1µF

NJM2883

R

CONTROL

NOISE

BYPASS

GND

1.0µF *4

Cp=0.01µF

*4 1.9V ≤ Vo ≤ 2.6V version : Co=2.2uF

Vo ≤ 1.8V version : Co=4.7uF

State of control terminal:

• “H”→ output is enabled.

• “L” or “open” → output is disabled.

Noise bypass Capacitance Cp

Noise bypass capacitance Cp reduces noise generated by band-gap reference circuit.

Noise level and ripple rejection will be improved when larger Cp is used.

Use of smaller Cp value may cause oscillation.

Use the Cp value of 0.01uF greater to avoid the problem.

-4-

Ver.2004-12-22

Share Link: