NLSX3013(2009) 查看數據表（PDF） - ON Semiconductor
零件编号
产品描述 (功能)
生产厂家
NLSX3013 Datasheet PDF : 10 Pages
| |||
NLSX3013
DC ELECTRICAL CHARACTERISTICS
−405C to +855C
Symbol
Parameter
VIHC I/O VCC Input HIGH
Voltage
VILC I/O VCC Input LOW
Voltage
VIHL I/O VL Input HIGH
Voltage
Test Conditions
(Note 1)
VCC (V)
(Note 2)
VL (V)
(Note 3)
1.3 to 4.5 0.9 to (VCC – 0.4)
1.3 to 4.5 0.9 to (VCC – 0.4)
Min
0.8 *
VCC
−
Typ
(Note 4)
−
−
1.3 to 4.5 0.9 to (VCC – 0.4) 0.8 * VL
−
Max
−
0.2 *
VCC
−
Unit
V
V
V
VILL I/O VL Input LOW
Voltage
1.3 to 4.5 0.9 to (VCC – 0.4)
−
−
0.2 * VL V
VIH Control Pin Input HIGH
Voltage
TA = +25°C
1.3 to 4.5 0.9 to (VCC – 0.4) 0.8 * VL
−
−
V
VIL Control Pin Input LOW
Voltage
TA = +25°C
1.3 to 4.5 0.9 to (VCC – 0.4)
−
−
0.2 * VL V
VOHC I/O VCC Output HIGH
Voltage
I/O VCC Source Current = 1.3 to 4.5 0.9 to (VCC – 0.4) 0.8 *
−
20 mA
VCC
VOLC I/O VCC Output LOW
I/O VCC Sink Current = 20 mA 1.3 to 4.5 0.9 to (VCC – 0.4)
−
−
Voltage
VOHL I/O VL Output HIGH
Voltage
I/O VL Source Current = 20 mA 1.3 to 4.5 0.9 to (VCC – 0.4) 0.8 * VL
−
−
V
0.2 * V
VCC
−
V
VOLL I/O VL Output LOW
Voltage
I/O VL Sink Current = 20 mA 1.3 to 4.5 0.9 to (VCC – 0.4)
−
−
0.2 * VL V
1. Normal test conditions are VEN = 0 V, CIOVCC = 15 pF and CIOVL = 15 pF, unless otherwise specified.
2. VCC is the supply voltage associated with the high voltage port, and VCC ranges from +1.3 V to 4.5 V under normal operating conditions.
3. VL is the supply voltage associated with the low voltage port. VL must be less than or equal to (VCC – 0.4) V during normal operation. However,
during startup and shutdown conditions, VL can be greater than (VCC – 0.4) V.
4. Typical values are for VCC = +2.8 V, VL = +1.8 V and TA = +25°C. All units are production tested at TA = +25°C. Limits over the operating
temperature range are guaranteed by design.
POWER CONSUMPTION
Symbol
Parameter
Test Conditions
(Note 5)
VCC (V)
(Note 6)
VL (V)
(Note 7)
IQ−VCC Supply Current from EN = VL; I/O VCCn = 0 V, I/O VLn = 0 V, 1.3 to 3.6 0.9 to (VCC – 0.4)
VCC
I/O VCCn = VCC or I/O VLn = VL and Io = 0
IQ−VL Supply Current from EN = VL; I/O VCCn = 0 V, I/O VLn = 0 V, 1.3 to 3.6 0.9 to (VCC – 0.4)
VL
I/O VCCn = VCC or I/O VLn = VL and Io = 0
−405C to +855C
Min Typ Max
−
−
1.0
−
−
1.0
Unit
mA
mA
EN = VL, I/O VCCn = 0 V, I/O VLn = 0 V,
I/O VCCn = VCC or I/O VLn = (VCC −
0.2 V) and Io = 0
< (VCC – 0.2)
−
ITS−VCC VCC Tristate Output
Mode Supply
Current
EN = 0 V
1.3 to 3.6 0.9 to (VCC – 0.4) −
−
2.0
−
1.0 mA
ITS−VL
IOZ
VL Tristate Output
Mode Supply
Current
I/O Tristate Output
Mode Leakage
Current
EN = 0 V
EN = 0 V
EN = 0 V
EN = 0 V
1.3 to 3.6 0.9 to (VCC – 0.4) −
VCC − 0.2
−
1.3 to 3.6 0.9 to (VCC – 0.4) −
VCC – 0.2
−
−
0.2 mA
−
2.0
−
0.15 mA
−
2.0
IEN Output Enable Pin
Input Current
−
1.3 to 3.6 0.9 to (VCC – 0.4) −
−
1.0 mA
5. Normal test conditions are VEN = 0 V, CIOVCC = 15 pF and CIOVL = 15 pF, unless otherwise specified.
6. VCC is the supply voltage associated with the high voltage port, and VCC ranges from +1.3 V to 4.5 V under normal operating conditions.
7. VL is the supply voltage associated with the low voltage port. VL must be less than or equal to (VCC – 0.4) V during normal operation. However,
during startup and shutdown conditions, VL can be greater than (VCC – 0.4) V.
http://onsemi.com
5
Share Link: 