P0722SB 查看數據表（PDF） - Teccor Electronics

零件编号

产品描述 (功能)

生产厂家

P0722SB

Ethernet/10BaseT/100BaseT Protector

Teccor Electronics 

Ethernet/10BaseT/100BaseT Protector

Ethernet/10BaseT/100BaseT Protector

The DO-214AA SIDACtor Ethernet protection series is intended for applications sensitive to

load values. Typically, high speed connections require a lower capacitance. CO values are

40% lower than standard devices.

SIDACtor devices are used to enable equipment to meet various regulatory requirements

including GR 1089, ITU K.20, K.21 and K.45, IEC 60950, UL 60950, and TIA-968 (formerly

known as FCC Part 68).

Electrical Parameters

Part

VDRM

VS

VT

IDRM

IS

IT

IH

CO

Number *

Volts

Volts

Volts

µAmps

mAmps

Amps

mAmps

pF

P0642S_

58

77

4

5

800

2.2

120

25

P0722S_

65

88

4

5

800

2.2

120

25

P0902S_

75

98

4

5

800

2.2

120

25

P1102S_

90

130

4

5

800

2.2

120

20

P3002S_

280

360

4

5

800

2.2

120

15

* For surge ratings, see table below.

General Notes:

• All measurements are made at an ambient temperature of 25 °C. IPP applies to -40 °C through +85 °C temperature range.

• IPP is a repetitive surge rating and is guaranteed for the life of the product.

• Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.

• VDRM is measured at IDRM.

• VS is measured at 100 V/µs.

• Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request.

• Off-state capacitance is measured at 1 MHz with a 2 V bias.

Surge Ratings

Series

A

B**

IPP

2x10 µs

Amps

150

250

IPP

8x20 µs

Amps

150

250

IPP

10x160 µs

Amps

90

150

** Contact factory for release date of B-rated devices.

IPP

10x560 µs

Amps

50

100

IPP

10x1000 µs

Amps

45

80

ITSM

60 Hz

Amps

20

30

di/dt

Amps/µs

500

500

http://www.teccor.com

+1 972-580-7777

2 - 14

© 2002 Teccor Electronics

SIDACtor® Data Book and Design Guide

Share Link: