LT1580 查看數據表（PDF） - Linear Technology

零件编号

产品描述 (功能)

生产厂家

LT1580

7A, Very Low Dropout Regulator

Linear Technology 

LT1580/LT1580 -2.5

BLOCK DIAGRA

VCONTROL

VPOWER

SENSE

FOR FIXED

VOLTAGE

DEVICE

ADJ

GND

VOUT

1580 BD

APPLICATIONS INFORMATION

The LT1580 is a low dropout regulator designed to power

the new generation of microprocessors. Low dropout

regulators have become more common in desktop com-

puter systems as microprocessor manufacturers have

moved away from 5V only CPUs. A wide range of supply

requirements exists today with new voltages just over the

horizon. In many cases the input-output differential is very

small, effectively disqualifying many of the low dropout

regulators on the market today. The LT1580 is designed to

make use of multiple power supplies, present in most

systems, to reduce the dropout voltage. This two supply

approach maximizes efficiency.

The second supply, at least 1V greater than the output

voltage, is used to provide power for the control circuitry

and supply the drive current to the NPN output transistor.

This allows the NPN to be driven into saturation, thereby

reducing the dropout voltage by a VBE compared to

conventional designs. The current requirement for the

control voltage is relatively small, equal to approximately

1% of the output current or about 70mA for a 7A load. The

bulk of this current is drive current for the NPN output

transistor. This drive current becomes part of the output

current.

The control voltage must be at least 1V greater than the

output voltage to obtain optimum performance. The maxi-

mum voltage on the VCONTROL pin is 13V. The maximum

voltage at the VPOWER pin is limited to 7V. GDN pin current

for fixed voltage devices is 6mA (typ) and is constant as a

function of load. ADJ pin current for adjustable devices is

60µA at 25°C and varies proportional to absolute tempera-

ture.

6

Share Link: