P89LPC9107FDH 查看數據表（PDF） - Philips Electronics

零件编号

产品描述 (功能)

生产厂家

P89LPC9107FDH

8-bit microcontrollers with two-clock accelerated 80C51 core 1 kB 3 V byte-erasable Flash with 8-bit A/D converter

Philips Electronics 

Philips Semiconductors

P89LPC9102/9103/9107

8-bit microcontrollers with two-clock accelerated 80C51 core

Table 4: P89LPC9102 pin description …continued

Symbol

Pin

Type Description

P1.5/RST

2

I

P1.5 — Port 1 bit 5 (input-only).

I

RST — External Reset input during power-on or if selected via User Configuration

Register 1 (UCFG1). When functioning as a reset input a LOW on this pin resets the

microcontroller, causing I/O ports and peripherals to take on their default states, and

the processor begins execution at address 0. When using an oscillator frequency

above 12 MHz, the reset input function of P1.5 must be enabled. An external

circuit is required to hold the device in reset at power-up until VDD has reached

its specified level. When system power is removed VDD will fall below the

minimum specified operating voltage. When using an oscillator frequency

above 12 MHz, in some applications, an external brownout detect circuit may

be required to hold the device in reset when VDD falls below the minimum

specified operating voltage.

VSS

3

I

Ground: 0 V reference.

VDD

7

I

Power supply: This is the power supply voltage for normal operation as well as Idle

mode and Power-down mode.

9397 750 14655

Product data sheet

Rev. 02 — 11 April 2005

© Koninklijke Philips Electronics N.V. 2005. All rights reserved.

10 of 58

Share Link: