PA-1001AIAB1 查看數據表（PDF） - Unspecified

零件编号

产品描述 (功能)

生产厂家

PA-1001AIAB1

SIGNAL CONDITIONERS & CONVERTERS

Unspecified 

CHARACTERISTICS AND SPECIFICATIONS:

POWER INPUT:

• Voltage: 8-30 VDC

• Current Draw: 125mA @ 24VDC, with all options equipped.

• Reverse polarity protected

PICKUP INPUT:

RF Pickup:

• Modulation Carrier Frequency: 20KHz

• Input Frequency: 2 Hz to 5KHz, adjustable trigger level

• Trigger Sensitivity: 20 millivolt peak to peak (minimum)

• Carrier Adjustment: to allow precise tuning of carrier signal to physical environment (e.g. air gap,

wall thickness)

• Maximum Air Gap: 0.160”

• Preferred Coil Inductance: 1.0 milliHenry +/- 10%

• Maximum Distance From Pickup To Preamplifier 100 feet

Magnetic Pickup:

• Input protected, RF and band pass filtered

• Input Frequency: 0 to 10KHz, adjustable trigger level

• Trigger Sensitivity: 4 millivolt RMS (minimum)

NOTE: At 4mV frequency range 10 Hz to 3KHz

• Input Impedance: 40K Ohms (nominal)

• Maximum Input Signal: 600 Volts RMS

• Maximum Distance From Pickup To Preamp: 100 feet

PULSE OUTPUTS:

• TTL/CMOS (Standard); Fan-out of 5 TTL/CMOS loads

• Open Collector: Maximum OFF state voltage 30 VDC

Maximum ON current 0.40 amps

• 0 to 10 VDC square wave

• Square wave tied to input voltage

• Pulse scaling (option): ÷2, ÷4, ÷8, ÷16, ÷32, ÷64, or ÷128 user selectable.

CURRENT OUTPUT OPTION:

• Accuracy +/- 0.05% of full-scale +/-200 PPM/°C.

• Available range 4 to 20mA.

• Output suitable for driving floating or grounded loads.

• Maximum loop impedance 500 ohms.

• Response time 0.3 seconds for 10 to 90 %.

VOLTAGE OUTPUT OPTION:

• Accuracy +/- 0.05% of full-scale +/-200 PPM/°C.

• Available range 0 to 5VDC or 0 to 10VDC, user selectable.

• Impedance less than 10 ohms.

• Response time 0.3 seconds for 10 to 90 %.

PA1001A – 7/02

Page 3 of 11

Share Link: