PA3212
PIN CONFIGURATION
CMOS IC
PIN DESCRIPTION
PIN NO.
1,12,13,24
11
2
3
5
6
7,18
8
PIN NAME
GND
BYPASS
GAIN0
GAIN1
LLINEIN
LHPIN
PVDD
RIN
10
LIN
14
PC-BEEP
17
HP/ LINE
15
SE/ BTL
19
VDD
20
RHPIN
23
RLINEIN
22
SHUTDOWN
4
LOUT+
9
LOUT-
16
ROUT-
21
ROUT+
I/O
Ground.
DESCRIPTION
Connected to voltage divider
I For gain control: Bit 0
I For gain control: Bit 1
I Line input for Left channel, available when pin15 is held low.
I Headphone input Left channel, available when pin15 is held high.
I Power supply voltage.
I
Differential input for right channel. And for single-ended inputs is also AC
ground.
Differential input for Left channel. And for single-ended inputs is also AC
I ground.
I
PC-BEEP mode input. When at least eight continuous >1-VPP square
waves is input to this pin, PC-BEEP is enabled.
I Input of MUX control. Being high to select the inputs of Pin6, 20, and low
to select inputs of PIN 5, 23.
I Low for BTL mode, high for SE mode.
I Analog VDD supply voltage
I Right channel headphone input, selected when pin17 is held high.
I Headphone input right channel, available when pin17 is held low.
I In shutdown mode when held low, expect PC-BEEP remains active.
O In BTL mode: left channel + output; In SE mode: left channel + output
O In BTL mode: left channel - output; In SE mode: high impedance
O In BTL mode: right channel + output; In SE mode: right channel + output
O In BTL mode: right channel - output; In SE mode: high impedance
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 9
QW-R502-310.A