PCA8536 查看數據表（PDF） - NXP Semiconductors.

零件编号

产品描述 (功能)

生产厂家

PCA8536

Automotive LCD driver for low multiplex rates including a 6 channel PWM generator

NXP Semiconductors. 

NXP Semiconductors

PCA8536

Automotive LCD low multiplex driver with 6 channel PWM generator

8.1.4 Command: mode-settings

Table 8. Mode-settings - mode settings command bit description

Bit

Symbol

Value

Description

7 to 4 -

0101

fixed value

3

BPS

backplane swapping

0[1]

backplane configuration 0

1

backplane configuration 1

2

INV

set inversion mode

0[1][2]

Driving scheme A: LCD line inversion mode

1

Driving scheme B: LCD frame inversion mode

1

PD

set power mode

1

power-down mode; backplane and segment

outputs are connected to VSS and the internal

oscillator is switched off

0[1]

power-up mode

0

E

display switch

0[1]

display disabled; backplane and segment

outputs are connected to VSS

1

display enabled

[1] Default value.

[2] See Section 8.1.4.2.

8.1.4.1 Backplane swapping

Backplane swapping can be configured with the BPS bit (see Table 8). It moves the

location of the backplane and the associated segment outputs from one side of the

PCA8536 to the other. Backplane swapping is sometimes desirable to aid with the routing

of PCBs that do not use multiple layers.

The BPS bit has to be set to the required value before enabling the display. Failure to do

so does not damage the PCA8536 or the display, however unexpected display content

may appear.

PCA8536

Product data sheet

All information provided in this document is subject to legal disclaimers.

Rev. 2 — 21 February 2012

© NXP B.V. 2012. All rights reserved.

9 of 74

Share Link: