PCF8833 查看數據表（PDF） - Philips Electronics

零件编号

产品描述 (功能)

生产厂家

PCF8833

STN RGB - 132×132×3 driver

Philips Electronics 

Philips Semiconductors

STN RGB - 132 × 132 × 3 driver

Objective specification

PCF8833

SYMBOL

V2H

R96 to R131

Dummy

PAD

731, 732

733 to 768

1, 462, 463,

580 to 623,

769

TYPE

O

O

LCD bias level

LCD row driver outputs

DESCRIPTION

6 INSTRUCTIONS

The PCF8833 communicates with the host using an 8-bit parallel interface or a 3-line serial interface. Processing of

instructions and data sent to the interface do not require the display clock. The display clock and interface clock are

independent from each other. The display clock is derived from the built-in oscillator.

The PCF8833 has 2 types of accesses; those defining the operating mode of the device (instructions) and those filling

the display RAM. Since writing to the RAM occurs more frequently, efficient data transfer is achieved by

autoincrementing the RAM address pointers.

There are 3 types of instructions:

1. For defining display configuration

2. For setting X and Y addresses

3. Miscellaneous.

Commands in the range of 00H to AFH not defined in Table 1 and command DDH have the same effect as no operation

(NOP).

All commands in range B0H to B9H and DEH to FFH are forbidden.

2003 Feb 14

7

Share Link: