PESDXS2UAT 查看數據表（PDF） - NXP Semiconductors.

零件编号

产品描述 (功能)

生产厂家

PESDXS2UAT

Double ESD protection diodes in SOT23 package

NXP Semiconductors. 

NXP Semiconductors

Double ESD protection diodes

in SOT23 package

Product data sheet

PESDxS2UAT series

APPLICATION INFORMATION

The PESDxS2UAT series can protect up to two lines against damage caused by unidirectional ElectroStatic Discharge

(ESD) and surge pulses. The PESDxS2UAT series can protect lines whose signal polarities are below ground.

PESDxS2UAT series provide a surge capability of up to 330 Watts peak pulse power per line for a 8/20 µs waveform.

line 1 to be protected

line 2 to be protected

PESDxS2UAT

ground

unidirectional protection

of two lines

line 1 to be protected

PESDxS2UAT

ground

bidirectional protection

of one line

001aaa179

Fig.10 Typical application: ESD protection of data lines.

Circuit board layout and protection device placement

Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT) and surge transients. The

following guidelines are recommended:

1. Place the PESDxS2UAT as close as possible to the input terminal or connector.

2. Minimize the path length between the PESDxS2UAT and the protected line.

3. Keep parallel signal paths to a minimum.

4. Avoid running protected conductors in parallel with unprotected conductors.

5. Minimize all printed-circuit board conductive loops including power and ground loops.

6. Minimize the length of transient return paths to ground.

7. Avoid using shared transient return paths to a common ground point.

8. Ground planes should be used whenever possible.

9. Use vias for multi-layer printed-circuit boards.

2004 Feb 18

10

Share Link: