SPT1019AIN 查看數據表（PDF） - Signal Processing Technologies
零件编号
产品描述 (功能)
生产厂家
SPT1019AIN Datasheet PDF : 12 Pages
| |||
ELECTRICAL SPECIFICATIONS
VCC =ground, VEE = -5.2 V ±0.3 V, TA =TMIN to TMAX, CC = 0 pF, ISet = 1.105 mA, unless otherwise specified.
TEST
PARAMETERS
Reference Voltage
Measured to VCC
Input Capacitance,
CONDITIONS
LEVEL
MIN
TYP
VI
1.3
-1.2
V
3.0
Data and Controls
Power Supply Sensitivity
VI
-120
20
Supply Current
VI
155
DYNAMIC CHARACTERISTICS (RL = 37.5 ohms, CL = 5 pF, TA = 25 °C, ISet = 1.105 mA)
Maximum Conversion Rate
B Grade
IV
165
A Grade
IV
275
Rise Time
10% to 90% G.S.
IV
Rise Time
TA = TMIN to TMAX
IV
10% to 90% G.S.
V
1.0
RL = 25 ohms
Current Settling Time, Clocked Mode To 0.2% G.S.
V
7.0
Current Settling Time, Clocked Mode To 0.8% G.S.
V
5.5
Current Settling Time, Clocked Mode To 0.2% G.S.
V
4.5
tSI
RL = 25 Ω
Clock to Output Delay, Clocked Mode
IV
2.2
tDSC
TA = TMIN to TMAX
IV
Data to Output Delay,
IV
3.2
Transparent Mode tDST
Convert Pulse Width, ( LOW or HIGH) B Grade
IV
IV
3.0
tPWL, tPWH
Glitch Energy
A Grade
Area = 1/2 VT
IV
1.8
V
4
Reference Bandwidth, -3 dB
V
1.0
Setup Time, Data and Controls
IV
1.0
tS
TA = TMIN to TMAX
IV
1.0
Hold Time, Data and Controls
IV
0.5
tH
Slew Rate
TA = TMIN to TMAX
IV
0.5
20% to 80% G.S.
IV
390
Clock Feedthrough
TA = TMIN to TMAX
IV
325
IV
TA = TMIN to TMAX
IV
MAX UNITS
1.0 V
pF
+120 µA/V
220 mA
MWPS
MWPS
1.6 ns
2.0 ns
ns
ns
ns
ns
4.0 ns
4.5 ns
6.0 ns
6.0 ns
ns
ns
pV-s
MHz
ns
ns
ns
ns
V/µS
V/µS
-48 dB
-48 dB
TEST LEVEL CODES
TEST LEVEL
All electrical characteristics are subject to the
I
following conditions:
II
All parameters having min/max specifications
are guaranteed. The Test Level column indi-
III
cates the specific device testing actually per-
IV
formed during production and Quality Assur-
ance inspection. Any blank section in the data
V
column indicates that the specification is not
tested at the specified condition.
VI
TEST PROCEDURE
100% production tested at the specified temperature.
100% production tested at TA = +25 °C, and sample
tested at the specified temperatures.
QA sample tested only at the specified temperatures.
Parameter is guaranteed (but not tested) by design
and characterization data.
Parameter is a typical value for information purposes
only.
100% production tested at TA = +25 °C. Parameter is
guaranteed over specified temperature range.
SPT
3
SPT1019
5/14/97
Share Link: 