PSD9342V10JT 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

PSD9342V10JT

Flash PSD, 3.3V Supply, for 8-bit MCUs 2 Mbit + 256 Kbit Dual Flash Memories and 64 Kbit SRAM

STMicroelectronics 

PSD834F2V

SUMMARY DESCRIPTION

The PSD family of memory systems for microcon-

trollers (MCUs) brings In-System-Programmability

(ISP) to Flash memory and programmable logic.

The result is a simple and flexible solution for em-

bedded designs. PSD devices combine many of

the peripheral functions found in MCU based ap-

plications.

The CPLD in the PSD devices features an opti-

mized macrocell logic architecture. The PSD mac-

rocell was created to address the unique

requirements of embedded system designs. It al-

lows direct connection between the system ad-

dress/data bus, and the internal PSD registers, to

simplify communication between the MCU and

other supporting devices.

The PSD device includes a JTAG Serial Program-

ming interface, to allow In-System Programming

(ISP) of the entire device. This feature reduces de-

velopment time, simplifies the manufacturing flow,

and dramatically lowers the cost of field upgrades.

Using ST’s special Fast-JTAG programming, a de-

sign can be rapidly programmed into the PSD in as

little as seven seconds.

The innovative PSD family solves key problems

faced by designers when managing discrete Flash

memory devices, such as:

– First-time In-System Programming (ISP)

– Complex address decoding

– Simulataneous read and write to the device.

The JTAG Serial Interface block allows In-System

Programming (ISP), and eliminates the need for

an external Boot EPROM, or an external program-

mer. To simplify Flash memory updates, program

execution is performed from a secondary Flash

memory while the primary Flash memory is being

updated. This solution avoids the complicated

hardware and software overhead necessary to im-

plement IAP.

ST makes available a software development tool,

PSDsoft Express, that generates ANSI-C compli-

ant code for use with your target MCU. This code

allows you to manipulate the non-volatile memory

(NVM) within the PSD. Code examples are also

provided for:

– Flash memory IAP via the UART of the host

MCU

– Memory paging to execute code across several

PSD memory pages

– Loading, reading, and manipulation of PSD

macrocells by the MCU.

5/89

Share Link: