RC0805JR-071M 查看數據表（PDF） - YAGEO Corporation

零件编号

产品描述 (功能)

生产厂家

RC0805JR-071M

GENERAL PURPOSE CHIP RESISTORS

YAGEO Corporation 

Chip Resistor Surface Mount RC SERIES 0805 (RoHS Compliant)

Product specification 4

9

MARKING

RC0805

Fig. 1

03

YNSC001

Value=10 KΩ

E-24 series: 3 digits

First two digits for significant figure and 3rd digit for number of zeros

Fig. 2

00

YNSC004

Value=10 KΩ

Both E-24 and E-96 series: 4 digits

First three digits for significant figure and 4th digit for number of zeros

For further marking information, please see special data sheet “Chip resistors marking”

CONSTRUCTION

The resistor is constructed on top

of a high-grade ceramic body.

Internal metal electrodes are added

on each end to make the contacts to

the thick film resistive element. The

composition of the resistive element

is a noble metal imbedded into a

glass and covered by a second glass

to prevent environment influences.

The resistor is laser trimmed to the

rated resistance value. The resistor

is covered with a protective epoxy

coat, finally the two external

terminations (matte tin on Ni-

barrier) are added. See fig.3

DIMENSIONS

Table 1

TYPE

L (mm)

W (mm)

H (mm)

I1 (mm)

I2 (mm)

RC0805

2.00 ±0.10

1.25 ±0.10

0.50 ±0.10

0.35 ±0.20

0.35 ±0.20

OUTLINES

For dimension see Table 1

H

I2

I1

W

L

Fig. 3 Chip resistor outlines

marking layer

overcoat

Primary glass layer

resistive layer

(Jumper chip is a conductor)

inner electrode

termination(Ni/matte tin)

ceramic substrate

overcoat

YNSC066

Jun 16, 2009 V.4

www.yageo.com

Share Link: