EPSON
2. Reset register (Control register D)
Select this register to reset the last five stages of the 1/215 divider, and the busy circuit.
Latch the hexadecimal value D using the ADDRESS LATCH pin, and set WRITE high to carry out the reset.
3. Reference signal (Control registers E and F)
Latch the hexadecimal value E or F using the ADDRESS LATCH pin, and set WRITE high to obtain the reference signal values on D0 to D3.
n Package dimensions
(1) RTC-58321
(Unit:mm)
(2) RTC-58323
Page - 7