S25FL064K 查看數據表（PDF） - Spansion Inc.

零件编号

产品描述 (功能)

生产厂家

S25FL064K

64-Mbit CMOS 3.0 Volt Flash Memory with 80-MHz SPI (Serial Peripheral Interface) Multi I/O Bus

Spansion Inc. 

S25FL064K

64-Mbit CMOS 3.0 Volt Flash Memory

with 80-MHz SPI (Serial Peripheral Interface) Multi I/O Bus

Data Sheet

Distinctive Characteristics

Architectural Advantages

 Single power supply operation

– Full voltage range: 2.7 to 3.6V read and write operations

 Memory architecture

– Uniform 4-kB sectors

– 256-byte page size

 Program

– Page Program (up to 256 bytes) in 0.7 ms (typical)

– Program operations are on a page by page basis

– Quad Page Programming

 Erase

– Bulk erase function

– Uniform sector erase (4 kB)

– Uniform block erase (32 kB and 64 kB)

– Erase/Program Suspend and Resume

 Cycling endurance

– 100,000 erase/program cycles typical

 Data retention

– 20-year data retention typical

 Process technology

– Manufactured on 0.09 µm process technology

 Package option

– Industry Standard Pinouts

– 16-pin SO package (300 mils)

– 8-pin SO package (208 mils)

Performance Characteristics

 Speed

– Normal READ (Serial): 33 MHz clock rate

– FAST_READ (Serial): 80 MHz clock rate (maximum)

– 80 MHz DUAL SPI/Quad SPI clocks

– 160/320 MHz equivalent Dual/Quad SPI

– 40 MB/s continuous data transfer rate

 Low Power Consumption

– 4 mA active current, <1 µA in Deep Power-down mode (typical)

– Industrial temperature range (–40°C to +85°C)

 Efficient “Continuous Read Mode”

– Low Instruction overhead

– Continuous Read with 8/16/32/64-byte Wrap

– As few as 8 clocks to address memory

– Allows true XIP (execute in place) operation

Memory Protection Features

 Advanced security features

– Software and Hardware Write-Protect

– Top/Bottom, 4-kB complement array protection

– Power Supply Lock-Down and OTP protection

– 64-Bit Unique ID for each device

– Discoverable Parameters (SFDP) Registers

– 3x 256-byte Security Registers with OTP locks

– Volatile & Non-volatile Status Register Bits

Publication Number S25FL064K_00

Revision 03

Issue Date July 13, 2011

This document states the current technical specifications regarding the Spansion product(s) described herein. Spansion Inc. deems the products to have been in sufficient pro-

duction volume such that subsequent versions of this document are not expected to change. However, typographical or specification corrections, or modifications to the valid com-

binations offered may occur.

Share Link: