SA1412 查看數據表（PDF） - Silan Microelectronics

零件编号

产品描述 (功能)

生产厂家

SA1412

TWO CELL LI+ BATTERY PROTECTION CIRCUIT

Silan Microelectronics 

SA1412

external mosfet off and on. There are four opration modes as follows:

1. Overcharge mode:

The battery voltage of either the H or L cell goes above overcharge detection voltage. The IC shuts down the

charging loop.Detection operation delay for overcharge detection can be set with the dead time setting pin.

2. Normal mode

The battery voltage of both H and L cells is above overdischarge detection voltage and below overcharge

detection voltage.

3. Overdischarge mode

The battery voltage of either the H or L cell drops below overdischarge detection voltage. The IC shuts down

the discharging loop.Dead time for overdischarge detection is set internally.

4. Overcurrent mode

The voltage between CS-GND goes above overcurrent detection voltage during discharge. The IC shuts down

the discharging loop.

TEST CIRCUIT

HANGZHOU SILAN MICROELECTRONICS CO.,LTD

Http: www.silan.com.cn

REV:2.2 2007.09.28

Page 4 of 5

Share Link: