SG140-06T 查看數據表（PDF） - Microsemi Corporation
零件编号
产品描述 (功能)
生产厂家
SG140-06T Datasheet PDF : 9 Pages
| |||
SG140A/SG140 SERIES
18V& 24V POSITIVE REGULATOR
ELECTRICAL CHARACTERISTICS (Note 1)
SG140 - 18
(Unless otherwise specified, these specifications apply over full operating ambient temperatures for SG140-18 with -55°C ≤ TA ≤ 150°C, and VIN = 27V,
IO = 500mA, CIN = 0. 33µF, COUT = 0.1µF and are applicable for the K, R, and IG - Power package - only. Low duty cycle pulse testing techniques are
used which maintains junction and case temperature equal to the ambient temperature.)
Parameter
Test Conditions
SG140 - 18 Units
Min. Typ. Max.
Output Voltage
Line Regulation (Note 1)
Load Regulation (Note 1)
Total Output Voltage
IO = 5mA to 1.0A, TJ = 25°C
VIN = 21.5V to 33V
V = 21V to 33V, T = 25°C
IN
J
VIN = 24V to 30V, IO = 1.0A
V = 21V to 30V, I = 1.0A, T = 25°C
IN
O
J
IO = 5mA to 1.0A
I = 5mA to 1.5A, T = 25°C
O
J
IO = 250mA to 750mA, TJ = 25°C
17.3 18.0 18.7 V
180 mV
180 mV
90 mV
180 mV
180 mV
180 mV
90 mV
Tolerance
Quiescent Current
Quiescent Current Change
Dropout Voltage
Peak Output Current
Short Circuit Current
Ripple Rejection
Output Noise Voltage (rms)
VIN = 21V to 33V, IO = 5mA to 1.0A, P ≤ 15W
IO = 1A
TJ = 25°C
With Line: VIN = 21V to 33V
VIN = 21V to 33V, IO = 1A, TJ = 25°C
With Load: IO = 5mA to 1.0A
∆VO
=
100mV,
I
O
=
1A,
T
J
=
25°C
TJ = 25°C
T = 25°C
J
∆VIN = 10V, f = 120Hz, TJ = 25°C
f = 10Hz to 100KHz (Note 2)
17.1 18.0 18.9 V
7 mA
6 mA
0.8 mA
0.8 mA
0.5 mA
2 2.5 V
2.4
A
2.1
A
59
dB
40 µV/V
Long Term Stability
Thermal Shutdown
1000hrs. at TJ = 125°C
IO = 5mA
72
mV
175
°C
SG140 - 24
(Unless otherwise specified, these specifications apply over full operating ambient temperatures for SG140-24 with -55°C ≤ TA ≤ 150°C, and VIN = 33V,
IO = 500mA, CIN = 0. 33µF, COUT = 0.1µF and are applicable for the K, R, and IG - Power package - only. Low duty cycle pulse testing techniques are
used which maintains junction and case temperature equal to the ambient temperature.)
Parameter
Output Voltage
Line Regulation (Note 1)
Load Regulation (Note 1)
Total Output Voltage
Tolerance
Quiescent Current
Quiescent Current Change
Dropout Voltage
Peak Output Current
Short Circuit Current
Ripple Rejection
Output Noise Voltage (rms)
Long Term Stability
Thermal Shutdown
Test Conditions
IO = 5mA to 1.0A, TJ = 25°C
V = 28V to 38V
IN
VIN = 27V to 38V, TJ = 25°C
V = 30V to 36V, I = 1.0A
IN
O
VIN = 27.1V to 35V, IO = 1.0A, TJ = 25°C
IO = 5mA to 1.0A
IO = 5mA to 1.5A, TJ = 25°C
IO = 250mA to 750mA, TJ = 25°C
VIN = 27V to 38V, IO = 5mA to 1.0A, P ≤ 15W
IO = 1.0A
TJ = 25°C
With Line: V = 27V to 38V
IN
VIN = 28V to 38V, IO = 1A, TJ = 25°C
With Load: I = 5mA to 1.0A
O
∆VO = 100mV, IO = 1A, TJ = 25°C
T = 25°C
J
TJ = 25°C
∆VIN = 10V, f = 120Hz, TJ = 25°C
f = 10Hz to 100KHz (Note 2)
1000hrs. at TJ = 125°C
IO = 5mA
SG140 - 24
Min. Typ. Max.
Units
23 24 25 V
240 mV
240 mV
120 mV
240 mV
240 mV
240 mV
120 mV
22.8 24.0 25.2 V
7 mA
6 mA
0.8 mA
0.8 mA
0.5 mA
2 2.5 V
2.4
A
2.1
A
56
dB
40 µV/V
96
mV
175
°C
Note 1. All regulation tests are made at constant junction temperature with low duty cycle testing.
2. This test is guaranteed but is not tested in production.
2/90 Rev 1.4 6/97
Copyright 1997
LINFINITY Microelectronics Inc.
11861 Western Avenue ∞ Garden Grove, CA 92841
8
(714) 898-8121 ∞FAX: (714) 893-2570
Share Link: 