SI-3011ZFE 查看數據表（PDF） - Sanken Electric co.,ltd.
零件编号
产品描述 (功能)
生产厂家
SI-3011ZFE Datasheet PDF : 2 Pages
| |||
1-1-1 Linear Regulator ICs
SI-3000ZFE Series 5-Terminal, Low Dropout Voltage Linear Regulator ICs
■Features
• Compact full-mold package (equivalent to
TO220)
• Output current: 3.0A
• Low dropout voltage: VDIF ≤ 0.7V (at IO = 3.0A)
• Low circuit current at output OFF: Iq (OFF) ≤ 1µA
• Built-in overcurrent and thermal protection circuits
■Applications
• Secondary stabilized power supply (local
power supply)
■Absolute Maximum Ratings
Parameter
DC Input Voltage
Output Control Terminal Voltage
DC Output Current
Power Dissipation
Junction Temperature
Operating Ambient Temperature
Storage Temperature
Thermal Resistance (Junction to Case)
Thermal Resistance (Junction to Ambient
Air)
Symbol
VIN*1
VC
IO*1
PD1
PD2
Tj
Top
Tstg
θ j-c
θ j-a
Ratings
10
6
3.0
20 (With infinite heatsink)
1.5 (Without heatsink, stand-alone operation)
–30 to +125
–30 to +100
–30 to +125
5.0
66.7 (Without heatsink, stand-alone operation)
(Ta = 25°C)
Unit
V
V
A
W
W
°C
°C
°C
°C/W
°C/W
■Recommended Operating Conditions
Parameter
Input Voltage
Output Current
Operating Ambient Temperature
Operating Junction Temperature
Output Voltage Variable Range
Symbol
Ratings
Unit
VIN
*2 to 6*1
V
IO
0 to 3
A
Top (a)
–20 to +85
°C
Top (j)
–20 to +100
°C
VOADJ
1.2 to 5
V
*1: VIN (max) and IO (max) are restricted by the relationship PD = (VIN - VO) × IO.
*2: Set the input voltage to 2.4V or higher when setting the output voltage to 2.0V or lower.
■Electrical Characteristics
(Ta = 25°C, VC = 2V unless otherwise specified)
Parameter
Symbol
Reference Voltage
Line Regulation
Load Regulation
Dropout Voltage
Quiescent Circuit Current
Circuit Current at Output OFF
Temperature Coefficient
of Output Voltage
Ripple Rejection
Overcurrent Protection Starting Current*2
*4
Control Voltage (Output ON)*3
Control Voltage (Output OFF)*3
VC
Control Current(Output ON)
Terminal
Control Current(Output OFF)
VADJ
Conditions
∆VOLINE
Conditions
∆VOLOAD
Conditions
VDIF
Conditions
Iq
Conditions
Iq (OFF)
Conditions
∆VO/∆Ta
Conditions
RREJ
Conditions
IS1
Conditions
VC, IH
VC, IL
IC, IH
Conditions
IC, IL
Conditions
min.
1.078
3.2
2
–5
SI-3011ZFE
typ.
1.100
VIN=VO+1V, IO=10mA
VIN=3.3 to 5V, IO=10mA (VO=2.5V)
VIN=3.3V, IO=0 to 3A (VO=2.5V)
IO=3A (VO=2.5V)
1
VIN=VO+1V, IO=0A, VC=2V
VIN=VO+1V, VC=0V
±0.3
Tj=0 to 100°C
60
VIN=VO+1V, f=100 to 120HZ, IO=0.1A
VIN=VO+1V
VC=2.7V
0
VC=0V
max.
1.122
10
40
0.7
1.5
1
0.8
100
*1: Set the input voltage to 2.4V or higher when setting the output voltage to 2.0V or lower.
*2: IS1 is specified at the 5% drop point of output voltage VO under the Output Voltage parameter conditions.
*3: Output is OFF when the output control terminal VC is open. Each input level is equivalent to LS-TTL level. Therefore, the device can be driven directly by LS-TTLs.
*4: These products cannot be used in the following applications because the built-in foldback-type overcurrent protection may cause errors during start-up stage.
(1) Constant current load (2) Positive and negative power supply (3) Series-connected power supply (4) VO adjustment by raising ground voltage
Unit
V
mV
mV
V
mA
µA
mV/ °C
dB
A
V
µA
µA
38 ICs
Share Link: 