ST7MDT2-DVP2 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

ST7MDT2-DVP2

ST7MDT2-DVP2 Development Kit User Manual

STMicroelectronics 

INSTRUCTIONS FOR USE—WARNING

This product is conform to the 89/336/EEC Directive. It complies with the ITE EN55022 standard for

EMC emissions and generic 50082-1 (1992 edition) immunity standards.

This product is an FCC Class-A apparatus. In a residential environment, it may cause

radioelectrical disturbances.

In addition, this development board is not contained in an outer casing; consequently, it cannot be

immune against electrostatic discharges (ESD). It should therefore be handled only in static safe

working areas. Please refer to Appendix A: EMC Conformity and Safety Requirements on page 67 for

relevant safety information.

USE IN LIFE SUPPORT DEVICES OR SYSTEMS MUST BE EXPRESSLY AUTHORIZED.

STMicroelectronics PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN

LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF

STMicroelectronics. As used herein:

1. Life support devices or systems are those

which (a) are intended for surgical implant into

the body, or (b) support or sustain life, and whose

failure to perform, when properly used in

accordance with instructions for use provided

with the product, can be reasonably expected to

result in significant injury to the user.

2. A critical component is any component of a life

support device or system whose failure to

perform can reasonably be expected to cause the

failure of the life support device or system, or to

affect its safety or effectiveness.

Share Link: