ST8016 查看數據表（PDF） - Sitronix Technology Co., Ltd.
零件编号
产品描述 (功能)
生产厂家
ST8016 Datasheet PDF : 28 Pages
| |||
ST8016
1 FEATURES
n Number of LCD drive outputs: 160
n Supply voltage for LCD drive: +15.0 to +30.0 V
n Supply voltage for the logic system: +2.5 to +5.5 V
n Low power consumption
n Low output impedance
(Segment mode)
n Shift clock frequency
- 20 MHz (MAX.): VDD = +5.0 ± 0.5 V
- 12 MHz (MAX.): VDD = +3.0 to + 4.5 V
- 8 MHz (MAX.): VDD = +2.5 to + 3.0 V
n Adopts a data bus system
n 4-bit/8-bit parallel input modes are
selectable with a mode (MD) pin
n Automatic transfer function of an
enable signal
n Automatic counting function which, in
the chip selection mode, causes the
internal clock to be stopped by
automatically counting 160 bits of input
data
n Line latch circuits are reset when
/DISPOFF active
(Common mode)
n Shift clock frequency: 4 MHz (MAX.)
n Built-in 160-bit bi-directional shift
register (divisible into 80 bits x 2)
n Available in a single mode (160-bit shift
register) or in a dual mode (80-bit shift
register x 2)
- Y1->Y160 Single mode
- Y160->Y1 Single mode
- Y1->Y80, Y81->Y160 Dual mode
- Y160->Y81, Y80->Y1 Dual mode
The above 4 shift directions are
pin-selectable
n Shift register circuits are reset when
/DISPOFF active
2 DESCRIPTION
The ST8016 is a 160-output segment/common driver IC suitable for driving large/medium scale dot
matrix LCD panels, and is used in personal computers/work stations. Through the use of SST
(Super Slim TCP) technology, it is ideal for substantially decreasing the size of the frame section of
the LCD module. The ST8016 is good both as a segment driver and a common driver, and it can
create a low power consuming, high-resolution LCD.
Ver 2.0
Page 2/28
2008/05/07
Share Link: 