ST92196A4 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

ST92196A4

8/16-BIT MCU FOR TV APPLICATIONS WITH UP TO 96K ROM, ON-SCREEN-DISPLAY AND 1 OR 2 DATA SLICERS

STMicroelectronics 

1 GENERAL DESCRIPTION

GENERAL DESCRIPTION

1.1 INTRODUCTION

The ST92196A family brings the enhanced ST9

register-based architecture to a new range of high-

performance microcontrollers specifically de-

signed for TV applications. Their performance de-

rives from the use of a flexible 256-register pro-

gramming model for ultra-fast context switching

and real-time event response. The intelligent on-

chip peripherals offload the ST9 core from I/O and

data management processing tasks allowing criti-

cal application tasks to get the maximum use of

core resources. The ST9 MCU devices support

low power consumption and low voltage operation

for power-efficient and low-cost embedded sys-

tems.

1.1.1 Core Architecture

The nucleus of the ST92196A is the enhanced

ST9 Core that includes the Central Processing

Unit (CPU), the register file, the interrupt and DMA

controller.

Three independent buses are controlled by the

Core: a 16-bit memory bus, an 8-bit register ad-

dressing bus and a 6-bit interrupt/DMA bus which

connects the interrupt and DMA controllers in the

on-chip peripherals with the core.

This multiple bus architecture makes the ST9 fam-

ily devices highly efficient for accessing on and

off-chip memory and fast exchange of data with

the on-chip peripherals.

The general-purpose registers can be used as ac-

cumulators, index registers, or address pointers.

Adjacent register pairs make up 16-bit registers for

addressing or 16-bit processing. Although the ST9

has an 8-bit ALU, the chip handles 16-bit opera-

tions, including arithmetic, loads/stores, and mem-

ory/register and memory/memory exchanges.

Many opcodes specify byte or word operations,

the hardware automatically handles 16-bit opera-

tions and accesses.

For interrupts or subroutine calls, the CPU uses a

system stack in conjunction with the stack pointer

(SP). A separate user stack has its own SP. The

separate stacks, without size limitations, can be in

on-chip RAM (or in Register File) or off-chip mem-

ory.

1.1.2 Instruction Set

The ST9 instruction set consists of 94 instruction

types, including instructions for bit handling, byte

(8-bit) and word (16-bit) data, as well as BCD and

Boolean formats. Instructions have been added to

facilitate large program and data handling through

the MMU, as well as to improve the performance

and code density of C Function calls. 14 address-

ing modes are available, including powerful indi-

rect addressing capabilities.

The ST9’s bit-manipulation instructions are set,

clear, complement, test and set, load, and various

logic instructions (AND, OR, and XOR). Math func-

tions include add, subtract, increment, decrement,

decimal adjust, multiply, and divide.

1.1.3 Operating Modes

To optimize performance versus the power con-

sumption of the device, ST9 devices now support

a range of operating modes that can be dynami-

cally selected depending on the performance and

functionality requirements of the application at a

given moment.

Run Mode. This is the full speed execution mode

with CPU and peripherals running at the maximum

clock speed delivered by the Phase Locked Loop

(PLL) of the Clock Control Unit (CCU).

Slow Mode. Power consumption can be signifi-

cantly reduced by running the CPU and the periph-

erals at reduced clock speed using the CPU Pres-

caler and CCU Clock Divider.

Wait For Interrupt Mode. The Wait For Interrupt

(WFI) instruction suspends program execution un-

til an interrupt request is acknowledged. During

WFI, the CPU clock is halted while the peripheral

and interrupt controller keep running at a frequen-

cy programmable via the CCU. In this mode, the

power consumption of the device can be reduced

by more than 95% (Low Power WFI).

Halt Mode. When executing the HALT instruction,

and if the Watchdog is not enabled, the CPU and

its peripherals stop operating and the status of the

machine remains frozen (the clock is also

stopped). A reset is necessary to exit from Halt

mode.

8/268

3

Share Link: