STUSB06EHTR 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

STUSB06EHTR

3.3 V USB transceiver

STMicroelectronics 

STUSB06E

3.3 V USB transceiver

Features

■ Compliant to USB v2.0 for full-speed (12 Mb/s)

and low-speed (1.5 Mbps) operation

■ HBM = ± 9 kV on D+, D- lines, ± 7 kV on VREG

■ ± 6 kV ESD compliant to IEC-61000-4-2 on D+,

D-, VREG lines

■ Separate I/O supply with operation down to

1.6 V

■ Integrated 150 kΩ switchable pull-up from D+

to VREG

■ Supports host negotiation protocol (DP pull-up

auto-connection after SE0)

■ SEO active low interrupt in HNP mode (INT,

VCC_IO referred)

■ Very low power consumption to meet USB

'suspend' current requirements

■ No power supply sequencing requirements

■ Software controlled re-enumeration

(SOFTCON)

■ Available in small BCC++16L package

3 mm x 3 mm max thickness 0.80 mm halogen

free RoHS compliant package

Applications

■ Mobile phones

■ PDAs

■ MP3 players

■ Digital still cameras

BCC++16L

(3 mm x 3 mm)

Description

The STUSB06E is a single chip transceiver that

complies with the physical layer specifications of

the Universal Serial Bus (USB) v2.0 standard. It is

powered by external 3.3 V supply and has an

integrated 150 kΩ resistor to implement charger

detection with weak pull-up method.

The STUSB06E also supports sharing mode

when VREG is not present, which allows the D+/D-

lines to be shared with other serial protocols.

It supports both full-speed (12 Mbps) and low-

speed (1.5 Mbps) operation. It is also designed to

operate down to 1.6 V so that it is compatible with

lower system voltages of most portable systems,

which include cell phones, PDAs and MP3

players.

Table 1. Device summary

Order code

STUSB06EHTR

December 2008

Package

BCC++16L (3 mm x 3 mm)

Rev 1

Packaging

3000 parts per reel

1/20

www.st.com

20

Share Link: