TCA1C106M8R 查看數據表（PDF） - ROHM Semiconductor

零件编号

产品描述 (功能)

生产厂家

TCA1C106M8R

Chip tantalum capacitors with open-function built-in

ROHM Semiconductor 

Tantalum capacitors

TCFG series

Item

Adhesion

Performance

Terminals must not detach.

Test conditions

With the device mounted on the printed

circuit board, apply a force of 0.5kg f

from each side for a period of 10 ± 1s.

Device

External dimensions

Refer to "External dimensions"

Markings

Resistance to Marking must be easy to read.

solvents

Solderability

Inspect the solder cover of

the terminals using a solder

immersion test

At least 3 / 4 of the surface of the immersed

terminals must be covered with new solder.

Resistance to Capacitance Value must be stable during measurement.

vibration

Appearance No noticeable irregularities.

Reverse

polarity

withstanding

voltage

Appearance

L.C

∆C / C

tanδ

No noticeable irregularities, and the markings

must be easy to read.

Must be less than or equal to twice the initial

specified value.

Within ± 10% of the value before the test.

Must be less than or equal to 1.5 times the

initial specified value.

Force

Printed circuit board

Measure using slide calipers that meet

the requirements of JIS B7507 Class 2.

Immerse in isopropyl alcohol for

30 ± 5s.

Immersion speed: 25 ± 2.5mm / s

Pre-processing (accelerated aging):

leave for 1hr over boiling distilled water.

Solder temperature: 235 ± 5°C

Immersion time: 2 ± 0.5s

Solder type: H63A

Flux: rosin 25%, IPA 75%

Vibrate in the X / Y axis at frequencies of

10~55~10Hz / minute for two hours

each, with a total vibration amplitude of

1.5mm.

Apply either 0.1 times the rated voltage,

or 3V, whichever is smaller, via a series

resister of 3Ωmax. and 0.1Ωmin. at a

temperature of 85 ± 2°C.

5/15

Share Link: