TDA1010 查看數據表（PDF） - Philips Electronics

零件编号

产品描述 (功能)

生产厂家

TDA1010

6 W audio power amplifier in car applications, 10 W audio power amplifier in mains-fed applications

Philips Electronics 

Philips Semiconductors

6 W audio power amplifier in car applications

10 W audio power amplifier in mains-fed applications

Product specification

TDA1010A

Notes

1. Measured with an ideal coupling capacitor to the speaker load.

2. Up to Po ≤ 3 W : dtot ≤ 1%.

3. Measured with a load impedance of 20 kΩ.

4. Independent of load impedance of preamplifier.

5. Output impedance of preamplifier (ZΟ) is correlated (within 10%) with the input impedance (Zi) of the power

amplifier.

6. Unweighted r.m.s. noise voltage measured at a bandwidth of 60 Hz to 15 kHz (12 dB/octave).

7. Ripple rejection measured with a source impedance between 0 and 2 kΩ (maximum ripple amplitude: 2 V).

8. The tab must be electrically floating or connected to the substrate (pin 9).

Fig.3 Test circuit.

November 1982

6

Share Link: