Philips Semiconductors
USB smart card reader (OTP or ROM)
Product specification
TDA8030; TDA8031
1 FEATURES
• 83C51 core with 16 kbytes EPROM (ROM); 256 bytes
RAM; 512 bytes AUXRAM; Timer 0,1, 2 and enhanced
UART
• Full speed USB interface device which complies with
USB 1.1 specification; accessible with MOVX
instructions
• Control input and output; 1 generic input and output and
2 generic input end-points
• Compatible with bus powered and suspend mode
supply current requirements
• Specific ISO7816 UART; accessible with MOVX
instructions for automatic convention processing;
variable baud rate through frequency or division ratio
programming; error management at character level for
T = 0 protocol; extra guard time register
• VCC generation (5 or 3 V maximum current 55 mA or
1.8 V maximum current 35 mA) with controlled
rise and fall times; current limitation and overload
detection at 100 mA
• Cards clock generation with three times synchronous
frequency doubling (12, 6, 3 and 1.5 MHz)
• Cards clock STOP HIGH or LOW or 1.25 MHz (from an
integrated oscillator) for cards power reduction mode
• Automatic activation and deactivation sequences
through an independent sequencer
• Supports the asynchronous protocols T = 0 and T = 1 in
accordance with ISO7816 and EMV
• Versatile 24-bit time-out counter for Answer To Reset
(ATR) and waiting times processing
• Supports synchronous cards
• Specific Elementary Time Unit (ETU) counter for Block
Guard Time (BGT)
• Current limitations on cards contacts and emergency
deactivation in case of over consumption or overheating
• Special circuitry for killing spikes during power-on or
power-off
• Supply supervisor for power-on or power-off reset
• High efficiency inductive DC-to-DC converter for VCC
generation
• Soft switch on for avoiding current inrush at plug in
• Enhanced ESD protections on cards contacts (6 kV
minimum)
• Software library for easy integration within the
application.
2 APPLICATIONS
• Smart card readers for PC’s or Set Top Boxes.
3 GENERAL DESCRIPTION
The TDA8030; TDA8031 is a bus powered full-speed USB
device. All analog and digital functions for an EMV
compliant Smart Card Reader are built-in. The embedded
83C51 microcontroller has 16 kbytes EPROM (ROM for
TDA8031), 256 bytes RAM and 512 bytes of AUXRAM.
4 ORDERING INFORMATION
TYPE NUMBER
TDA8030HL
TDA8031HL
NAME
LQFP64
PACKAGE
DESCRIPTION
plastic low profile quad flat package; 64 leads; body 10 × 10 × 1.4 mm
VERSION
SOT314-2
2003 Jul 04
3