TEN5-2410WI 查看數據表（PDF） - Traco Power
零件编号
产品描述 (功能)
生产厂家
TEN5-2410WI Datasheet PDF : 3 Pages
| |||
DC/DC Converters
TEN 5WI Series
6 Watt
Input Specifications
Input current no load /full load
24 Vin models: 20 mA typ.
48 Vin models: 10 mA typ.
Start-up voltage /
under voltage shut down
24 Vin models: 9 VDC / 8.5 VDC typ.
48 Vin models: 18 VDC / 16 VDC typ.
Surge voltage (1 sec. max.)
24 Vin models: 50 V max.
48 Vin models: 100 V max.
Reverse voltage protection
1.0 A max.
Conducted noise (input)
EN 55022 level A, FCC part 15, level A
Output Specifications
Voltage set accuracy
± 2.0 % max.
Regulation
– Input variation Vin min. to Vin max.
– Load variation 10 – 100 %
single output models:
dual output models:
± 0.3 % max.
± 2.0 % max.
± 2.0 % max. balanced load
± 3.0 % max. unbalanced load
Ripple and noise (20 MHz Bandwidth)
75 mVpk-pk max
Temperature coefficient
± 0.02 % / K
Current limitation
> 110% of Iout max., constant current
Short circuit protection
indefinite (automatic recovery)
Capacitive load
3.3 /5 VDC models
12 /15 VDC models
±5 VDC models
±12 /±15 VDC models
1000 µF max.
470 µF max.
220 µF max. (for each output)
100 µF max. (for each output)
General Specifications
Temperature ranges
– Operating
– Case temperature
– Storage
– 40 °C ... + 85 °C
+ 100 °C max.
– 55 °C ... + 125 °C
Derating
3.5% /K above 70°C
Humidity (non condensing)
95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217 E)
>1 Mio. h @ + 25 °C
Isolation voltage
Input/Output
1’500 VDC
Isolation capacity
Input/Output
350 pF typ
Isolation resistance
Input/Output (500 VDC)
> 1‘000 M Ohm
Switching frequency
300 kHz typ. (Pulse frequency modulation PFM)
Safety standards
UL/cUL 60950 , IEC 60950, EN 60950
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 3
Share Link: 