TIC225A 查看數據表（PDF） - Comset Semiconductors
零件编号
产品描述 (功能)
生产厂家
TIC225A Datasheet PDF : 3 Pages
| |||
SEMICONDUCTORS
TIC225A, TIC225B, TIC225C, TIC225D, TIC225E, TIC225M,
TIC225N, TIC225S
Notes:
1. These values apply bidirectionally for any value of resistance between the gate and Main Terminal
1.
2. This value applies for 50-Hz full-sine-wave operation with resistive load. Above 70°C derate
linearly to 110°C case temperature at the rate of 200 mA/°C.
3. This value applies for one 50-Hz full-sine-wave when the device is operating at (or below) the rated
value of on-state current. Surge may be repeated after the device has returned to original thermal
equilibrium. During the surge, gate control may be lost.
4. This value applies for one 50-Hz half-sine-wave when the device is operating at (or below) the rated
value of on-state current. Surge may be repeated after the device has returned to original thermal
equilibrium. During the surge, gate control may be lost.
5. This value applies for a maximum averaging time of 20 ms.
THERMAL CHARACTERISTICS
Symbol
R∂JC
R∂JA
Ratings
Junction to case thermal resistance
Junction to free air thermal resistance
ELECTRICAL CHARACTERISTICS
Value
≤ 2.5
≤ 62.5
Unit
°C/W
TC=25°C unless otherwise noted
Symbol
Ratings
Test Condition(s)
Min Typ Mx Unit
IDRM
Repetitive peak off-
state current
VD = Rated VDRM, , IG = 0,
TC = 110°C
Vsupply = +12 V†, RL = 10 Ω, tp(g) = > 20 µs
IGT
Gate trigger current
Vsupply = +12 V†, RL = 10 Ω, tp(g) = > 20 µs
Vsupply = -12 V†, RL = 10 Ω, tp(g) = > 20 µs
Vsupply = -12 V†, RL = 10 Ω, tp(g) = > 20 µs
Vsupply = +12 V†, RL = 10 Ω, tp(g) = > 20 µs
VGT
Gate trigger voltage
Vsupply = +12 V†, RL = 10 Ω, tp(g) = > 20 µs
Vsupply = -12 V†, RL = 10 Ω, tp(g) = > 20 µs
Vsupply = -12 V†, RL = 10 Ω, tp(g) = > 20 µs
Vsupply = +12 V†, IG = 0,
IH
Holding current
initiating ITM = 100 mA
Vsupply = -12 V†, IG = 0,
initiating ITM = -100 mA
IL
VTM
dv/dt
Latching current
Peak on-state voltage
Critical rate of rise of
off-state voltage
Vsupply = +12 V† (seeNote7)
Vsupply = -12 V† (seeNote7)
ITM = ± 12 A, IG = 50 mA (see Note6)
VDRM = Rated VDRM, IG = 0
TC = 110°C
dv/dt©
Critical rise of
VDRM = Rated VDRM, ITRM = ± 12A
communication voltage TC = 70°C
† All voltages are whit respect to Main Terminal 1.
-
- ±2 mA
- 0.8 5
-
-
-4.5
-3.5
-20
-10
mA
- 11.7 30
- 0.7 2
- -0.8 -2
- -0.8 -2
V
- 0.9 2
-
3 20
mA
- -4.7 -20
-
-
-
-
30
-30
mA
- ±1.6 ±2.1 V
- ±50
-
V/µs
±1 ±1.5 ±4.5
Page 2 of 3
Share Link: 