TK70001 查看數據表（PDF） - Toko America Inc

零件编号

产品描述 (功能)

生产厂家

TK70001

SINGLE INPUT, TWO OUTPUT SOLID STATE SWITCH

Toko America Inc  

TK70001

ABSOLUTE MAXIMUM RATINGS

Supply Voltage ......................................................... 14 V

Output Current .................................................... 130 mA

Power Dissipation (Note 1) ................................ 350 mW

Storage Temperature Range ................... -55 to +150 °C

Operating Temperature Range ...................-30 to +80 °C

Operating Voltage Range ............................... 1.6 to 12 V

Junction Temperature .......................................... 150 °C

Lead Soldering Temperature (10 s) ..................... 235 °C

TK70001 ELECTRICAL CHARACTERISTICS

Test conditions: TA = 25 °C, VIN = 2.5 V, unless otherwise specified.

SYMBOL

PARAMETER

TEST CONDITIONS

MIN TYP MAX UNITS

IQ

Quiescent Current

ISTBY

Standby Current

I

OUT

IGND

VDROP

∆VD

Output Current

Ground Current (Note 3)

Dropout Voltage

Balance Between Channels

IREV

Reverse Bias Current

ON/OFF CONTROL TERMINAL

IOUT = 0 mA, ICONT = 50 µA

0.6

1.2

mA

VIN = 8 V, Output OFF,

VCONT = 0 V

0.1

100

nA

VDROP = 0.5 V, ICONT = 50 µA

60

100

mA

VDROP = 0.5 V, ICONT = 100 µA

80

130

mA

IOUT = 50 mA, ICONT = 50 µA

3.5

5.5

mA

IOUT = 50 mA, ICONT = 50 µA

0.17 0.35

V

VDROP difference,

IOUT = 50 mA, ICONT = 50 µA

50

mV

V = 0 V, V = 8 V,

IN

REV

VCONT = 0 V, Output OFF

0.02

50

nA

ICONT

VCONT(ON)

VCONT(OFF)

Control Terminal Current

Control Voltage (ON)

Control Voltage (OFF)

VCONT = 1.6 V, IOUT = 50 mA

Output ON

Output OFF (Note 2)

50

95

140

µA

1.0

V

0.2

V

Note 1: Power dissipation is 350 mW when mounted as recommended. Derate at 2.8 mW/°C for operation above 25°C. Power dissipation is

150 mW in Free Air. Derate at 1.2 mW/°C for operation above 25 °C.

Note 2: By grounding this terminal, the operation completely stops and the input current decreases to a pA level.

Note 3: Ground current is defined as IIN - IOUT, excluding control terminal current. Refer to “Definition of Terms.”

Gen. Note: Parameters with min. or max. values are 100% tested.

Gen. Note: Exceeding “Absolute Maximum Ratings” can damage the device.

Page 2

January 1999 TOKO, Inc.

Share Link: