MSM80C154SGS-2K 查看數據表（PDF） - Oki Electric Industry

零件编号

产品描述 (功能)

生产厂家

MSM80C154SGS-2K

CMOS 8-bit Microcontroller

Oki Electric Industry 

¡ Semiconductor

MSM80C154S/83C154S

PIN DESCRIPTIONS

Symbol

P0.0 to P0.7

Descriptipn

Bidirectional I/O ports. They are also the data/address bus (input/output of data and output of

lower 8-bit address when external memory is accessed).

They are open-drain outputs when used as I/O ports, but 3-state outputs when used as data/address

bus.

P1.0 to P1.7

P1.0 to P1.7 are quasi-bidirectional I/O ports. They are pulled up internally when used as input

ports. Two of them have the following secondary functions:

•P1.0 (T2)

: used as external clock input pins for the timer/counter 2.

•P1.1 (T2EX) : used as trigger input for the timer/counter 2 to be reloaded or captured;

causing the timer/counter 2 interrupt.

P2.0 to P2.7

P3.0 to P3.7

ALE

P2.0 to P2.7 are quasi-bidirectional I/O ports. They also output the higher 8-bit address when

an external memory is accessed. They are pulled up internally when used as input ports.

P3.0 to P3.7 are quasi-bidirectional I/O ports. They are pulled up internally when used as input

ports. They also have the following secondary functions:

•P3.0 (RXD)

Serial data input/output in the I/O expansion mode and serial data input in the UART mode when

the serial port is used.

•3.1 (TXD)

Synchronous clock output in the I/O expansion mode and serial data output in the UART mode

when the serial port is used.

•3.2 (INT0)

Used as input pin for the external interrupt 0, and as count-up control pin for the timer/counter 0.

•3.3 (INT1)

Used as input pin for the external interrupt 1, and as count-up control pin for the timer/counter 1.

•3.4 (T0)

Used as external clock input pin for the timer/counter 0.

•3.5 (T1)

Used as external clock input pin for the timer/counter 1 and power-down-mode control input pin.

•3.6 (WR)

Output of the write-strobe signal when data is written into external data memory.

•3.7 (RD)

Output of the read-strobe signal when data is read from external data memory.

Address latch enable output for latching the lower 8-bit address during external memory access.

Two ALE pulses are activated per machine cycle except during external data memory access at

which time one ALE pulse is skipped.

PSEN

Program store enable output which enables the external memory output to the bus during external

program memory access. Two PSEN pulses are activated per machine cycle except during

external data memory access at which two PSEN pulses are skipped.

EA

When EA is held at "H" level, the MSM 83C154S executes instructions from internal program

memory at address 0000H to 3FFFH, and executes instructions from external program memory

above address 3FFFH.

When EA is held at "L" level, the MSM80C154S/MSM83C154S executes instructions from external

program memory for all addresses.

8/40

Share Link: