TLP715(2012) 查看數據表（PDF） - Toshiba
零件编号
产品描述 (功能)
生产厂家
TLP715 Datasheet PDF : 9 Pages
| |||
TLP715
Absolute Maximum Ratings (Ta = 25°C)
CHARACTERISTIC
SYMBOL RATING UNIT
Forward Current (Ta ≤ 83°C)
Forward Current Derating (Ta ≥ 83°C)
Peak Transient Forward Current (Note 1)
Reverse Voltage
Junction Temperature
IF
ΔIF/ΔTa
IFPT
VR
Tj
20
−0.48
1
5
125
mA
mA/°C
A
V
°C
Output Current 1 (Ta ≤ 25°C)
Output Current 2 (Ta ≤ 100°C)
Output Voltage
Supply Voltage
Junction Temperature
IO1
25 / −15
mA
IO2
13 / −13
mA
VO −0.5 to 20
V
VCC −0.5 to 20
V
Tj
125
°C
Operating Temperature Range
Topr −40 to 100
°C
Storage Temperature Range
Tstg −55 to 125
°C
Lead Solder Temperature (10 s)
Tsol
260
°C
Isolation Voltage (AC,1 min., R.H. ≤ 60%, Ta = 25°C) (Note 2)
BVs
5000
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Pulse width PW ≤ 1μs, 300pps.
Note 2: Device Considered a two terminal device : pins 1,2 and 3 shorted together and pins 4,5 and 6 shorted
together.
Recommended Operating Conditions
CHARACTERISTIC
SYMBOL MIN TYP. MAX UNIT
Input Current, ON
IF (ON)
4.5
−
10
mA
Input Voltage, OFF
VF (OFF)
0
−
0.8
V
Supply Voltage*
VCC
4.5
−
20
V
Operating Temperature
Topr
-40
−
100
°C
* This item denotes operating ranges, not meaning of recommended operating conditions.
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
2
2012-12-19
Share Link: 