TS2007
Electrical characteristics
Table 5. VCC = +5V, GND = 0V, Vic=2.5V, Tamb = 25°C (unless otherwise specified) (continued)
Symbol
Parameter
Min. Typ. Max. Unit
tSTBY
VN
Standby time
Output voltage noise f = 20Hz to 20kHz, RL=4Ω
Unweighted (Filterless, G=6dB)
A-weighted (Filterless, G=6dB)
Unweighted (with LC output filter, G=6dB)
A-weighted (with LC output filter, G=6dB)
Unweighted (Filterless, G=12dB)
A-weighted (Filterless, G=12dB)
Unweighted (with LC output filter, G=12dB)
A-weighted (with LC output filter, G=12dB)
5
ms
74
50
69
49
μVRMS
94
65
86
64
1. Standby mode is active when VSTBY is tied to GND.
2. Dynamic measurements - 20*log(rms(Vout)/rms(Vripple)). Vripple is the superimposed sinus signal to VCC @ f = 217Hz.
3. Independent of Gain configuration (6 or 12dB) and between IN+ or IN- and GND.
7/29