UPC3403C 查看數據表（PDF） - NEC => Renesas Technology

零件编号

产品描述 (功能)

生产厂家

UPC3403C

HIGH PERFORMANCE QUAD OPERATIONAL AMPLIFIER

NEC => Renesas Technology 

µPC3403

RECOMMENDED SOLDERING CONDITIONS

The µPC3403 should be soldered and mounted under the following recommended conditions.

For soldering methods and conditions other than those recommended below, contact an NEC Electronics sales

representative.

For technical information, see the following website.

Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html)

TYPES OF SURFACE MOUNT DEVICE

µPC3403G2: 14-pin plastic SOP (5.72 mm (225))

Process

Infrared Ray Reflow

Vapor Phase Soldering

Wave Soldering

Partial Heating Method

Conditions

Peak temperature: 230°C or below (Package surface temperature),

Reflow time: 30 seconds or less (at 210°C or higher),

Maximum number of reflow processes: 1 time.

Peak temperature: 215°C or below (Package surface temperature),

Reflow time: 40 seconds or less (at 200°C or higher),

Maximum number of reflow processes: 1 time.

Solder temperature: 260°C or below, Flow time: 10 seconds or less,

Maximum number of flow processes: 1 time,

Pre-heating temperature: 120°C or below (Package surface temperature).

Pin temperature: 300°C or below,

Heat time: 3 seconds or less (Per each side of the device).

Symbol

IR30-00-1

VP15-00-1

WS60-00-1

–

Caution Apply only one kind of soldering condition to a device, except for "partial heating method", or the

device will be damaged by heat stress.

TYPES OF THROUGH HOLE DEVICE

µPC3403C: 14-pin plastic DIP (7.62 mm (300))

Soldering

method

Wave soldering

Soldering conditions

Solder temperature: 260°C or below,

Flow time: 10 seconds or below

Recommended

condition symbol

Data Sheet G12847EJ7V0DS

7

Share Link: