VSC8117 查看數據表（PDF） - Vitesse Semiconductor

零件编号

产品描述 (功能)

生产厂家

VSC8117

ATM/SONET/SDH 622/155 Mb/s Transceiver Mux/Demux with Integrated Clock Generation and Clock Recovery

Vitesse Semiconductor 

VITESSE

SEMICONDUCTOR CORPORATION

ATM/SONET/SDH 622/155 Mb/s Transceiver Mux/Demux

with Integrated Clock Generation and Clock Recovery

Data Sheet

VSC8117

Package Thermal Characteristics

The VSC8117 is packaged into a thermally-enhanced plastic quad flatpack (PQFP). This package adheres

to the industry-standard EIAJ footprint for a 10x10mm body but has been enhanced to improve thermal dissipa-

tion with the inclusion of an exposed Copper Heat Spreader. The package construction is as shown in Figure 10.

Figure 11: Package Cross Section

Copper Heat Spreader

Insulator

Lead

Wire Bond

Die

Plastic Molding Compound

The thermal resistance for the VSC8117 package is improved through low thermal resistance paths from

the die to the exposed surface of the heat spreader and from the die to the lead frame through the heat spreader

overlap of the lead frame.

Table 16: 64-Pin PQFP Thermal Resistance

Symbol

θjc

θca

θca-100

θca-200

θca-400

θca-600

Description

Thermal resistance from junction to case

Thermal resistance from case to ambient in still air including conduction through

the leads for a non-thermally saturated board.

Thermal resistance from case to ambient in 100 LPFM air

Thermal resistance from case to ambient in 200 LPFM air

Thermal resistance from case to ambient in 400 LPFM air

Thermal resistance from case to ambient in 600 LPFM air

Value

2.5

37

31

28

24

22

Units

oC/W

oC/W

oC/W

oC/W

oC/W

oC/W

The VSC8117QB1 is designed to operate at a maximum case temperature of up to 115oC. The user must guar-

antee that the maximum case temperature specification is not violated. Given the thermal resistance of the pack-

age in still air, the user can operate the VSC8117QB1 in still air if the ambient temperature does not exceed

55oC (55oC = 115oC - 1.6W * 37oC/W). If operation above this ambient temperature is required, then an appro-

priate heatsink must be used with the part or adequate airflow must be provided.

Page 18

© VITESSE SEMICONDUCTOR CORPORATION

741 Calle Plano, Camarillo, CA 93012 • 805/388-3700 • FAX: 805/987-5896

G52221-0, Rev 4.1

1/8/00

Share Link: