VSC837 查看數據表（PDF） - Vitesse Semiconductor
零件编号
产品描述 (功能)
生产厂家
VSC837 Datasheet PDF : 26 Pages
| |||
VITESSE
SEMICONDUCTOR CORPORATION
Preliminary Data Sheet
VSC837
I/O Equivalent Circuits
ITC
VCC
50
PAD
50
50
PAD PAD
3.2Gb/s
68x68 Crosspoint Switch
TERM_CTRL
50
PAD
H/S Input Equivalent Circuit
DRIVE_CTRL
H/S Output Equivalent Circuit
Input Termination
The high-speed inputs of the VSC837 are internally terminated by a 100Ω resistor between true and com-
plement inputs. Termination resistors are isolated from each other on-chip. The termination will self-bias to
+2.0V (nominal) for AC-coupled applications. The ITC pin enables direct interconnection of multiple VSC837
devices. With ITC tied to VCC, the center point of the 100Ω termination resistor is tied to VCC, causing the ter-
minations to act as loads for an open-drain or open-collector differential output.
Table 7: Allowed Input Termination Schemes
Type
Description
1 AC-coupled input
2 DC-coupled from open-drain CML
3 DC-coupled from back-terminated 2.5V CML
4 DC-coupled from back-terminated 2.5V CML
5 DC-coupled from back-terminated 3.3V LV-PECL
Comments
Tie ITC LOW, 100Ω differential input termination,
input self-biased
Tie ITC HIGH, terminations acts as 50Ω load to VCC
Tie ITC HIGH, terminations acts as 50Ω load to VCC
Tie ITC LOW, 100Ω differential termination
(preferred over Type 3)
Tie ITC LOW, 100Ω differential termination
Some allowed termination schemes result in additional ICC current and power dissipation on-chip. See
Table 8.
Table 8: Additional Current and Power
Symbol
ICC-C
PCC-C
Description
Additional ICC current when receiving DC-Coupled
CML (ITC = HIGH)
Additional power dissipated on-chip for DC
terminating CML at inputs
Min Typ Max Units
680 mA
0.340 W
Conditions
G52309-0, Rev 3.0
02/16/01
© VITESSE SEMICONDUCTOR CORPORATION • 741 Calle Plano • Camarillo, CA 93012
Tel: (800) VITESSE • FAX: (805) 987-5896 • Email: prodinfo@vitesse.com
Internet: www.vitesse.com
Page 9
Share Link: 