DS2Y-S-DC6V(2012) 查看數據表（PDF） - Panasonic Corporation
零件编号
产品描述 (功能)
生产厂家
DS2Y-S-DC6V Datasheet PDF : 3 Pages
| |||
DS2Y
RATING
1. Coil data
Single side stable type
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
3V DC
5V DC
6V DC
9V DC
12V DC
24V DC
48V DC
70%V or less of
nominal voltage
(Initial)
Drop-out voltage
(at 20°C 68°F)
10%V or more of
nominal voltage
(Initial)
Nominal operating
current
[±10%] (at 20°C 68°F)
66.7mA
40mA
33.3mA
22.2mA
16.7mA
8.3mA
6.3mA
Coil resistance
[±10%] (at 20°C 68°F)
45Ω
125Ω
180Ω
405Ω
720Ω
2,880Ω
7,680Ω
Nominal operating
power
200mW
300mW
Max. applied voltage
(at 50°C 122°F)
200%V of
nominal voltage
2. Specifications
Characteristics
Contact
Rating
Electrical
characteristics
Item
Arrangement
Initial contact resistance, max.
Contact material
Max. switching power
Max. switching voltage
Max. switching current
Max. carrying current
Minimum operating power
Nominal operating power
Insulation resistance (Initial)
Breakdown voltage
(Initial)
Between open contacts
Between contact sets
Between contact and coil
FCC surge breakdown voltage between contacts
and coil
Temperature rise (at 20°C 68°F)
Operate time [Set time] (at 20°C 68°F)
Mechanical
characteristics
Expected life
Conditions
Unit weight
Release time [Reset time] (at 20°C 68°F)
Shock resistance
Vibration resistance
Mechanical
Electrical
Functional
Destructive
Functional
Destructive
Conditions for operation, transport and storage*
Max. operating speed (at rated load)
Specifications
2 Form C
Max. 50 mΩ (By voltage drop 6 V DC 1A)
Ag+Au clad
60 W, 62.5 VA (resistive load)
220 V DC, 250 V AC
2A
3A
Approx. 98 mW (147 mW: 48 V)
Approx. 200 mW (300 mW: 48 V)
Min. 100MΩ (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
750 Vrms for 1min. (Detection current: 10mA.)
1,000 Vrms for 1min. (Detection current: 10mA.)
1,000 Vrms for 1min. (Detection current: 10mA.)
1,500 V
Max. 65°C with nominal coil voltage across coil and at nominal switching capacity
Approx. 4 ms [approx. 3 ms]
(Nominal coil voltage applied to the coil, excluding contact bounce time.)
Approx. 3 ms [approx. 3 ms]
(Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode)
Min. 490 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.)
Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 5 mm
Min. 108
5×105 (1 A 30 V DC), 105 (2 A 30 V DC)
Ambient temperature: –40°C to +70°C –40°F to +158°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
60 cpm
Approx. 4g .14oz
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load. (TX/TX-S/TX-D relay AgPd contact type are available for low level load switching [10V DC, 10mA max. level])
*2 Half-wave pulse of sine wave: 11ms; detection time: 10µs
*3 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24).
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
ASCTB16E 201209-T
Share Link: 