ADUM6400 查看數據表（PDF） - Analog Devices
零件编号
产品描述 (功能)
生产厂家
ADUM6400 Datasheet PDF : 28 Pages
| |||
Data Sheet
ADuM6400/ADuM6401/ADuM6402/ADuM6403/ADuM6404
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 19.
Parameter
Storage Temperature Range (TST)
Ambient Operating Temperature
Range (TA)
Supply Voltages (VDD1, VDDL, VISO)1
Input Voltage (VIA, VIB, VIC, VID, VSEL)1, 2
Output Voltage (VOA, VOB, VOC, VOD)1, 2
Average Output Current per Pin3
Common-Mode Transients4
Rating
−55°C to +150°C
−40°C to +105°C
−0.5 V to +7.0 V
−0.5 V to VDDI + 0.5 V
−0.5 V to VDDO + 0.5 V
−10 mA to +10 mA
−100 kV/μs to +100 kV/μs
1 Each voltage is relative to its respective ground.
2 VDDI and VDDO refer to the supply voltages on the input and output sides of
a given channel, respectively. See the PCB Layout section.
3 See Figure 7 for maximum rated current values for various temperatures.
4 Common-mode transients exceeding the absolute maximum ratings may
cause latch-up or permanent damage.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
Table 20. Maximum Continuous Working Voltage1
Parameter
Max
Unit
AC Voltage, Bipolar Waveform
424
V peak
AC Voltage, Unipolar Waveform
Basic Insulation
600
V peak
Reinforced Insulation
565
V peak
DC Voltage
Basic Insulation
600
V peak
Reinforced Insulation
565
V peak
Applicable Certification
All certifications, 50-year operation
Working voltage per IEC 60950-1
Working voltage per IEC 60950-1
1 Refers to the continuous voltage magnitude imposed across the isolation barrier. See the Insulation Lifetime section for more information.
Rev. A | Page 11 of 28
Share Link: 