ADUM6400 查看數據表（PDF） - Analog Devices

零件编号

产品描述 (功能)

生产厂家

ADUM6400

Quad-Channel, 5 kV Isolators with Integrated DC-to-DC Converter

Analog Devices 

Data Sheet

ADuM6400/ADuM6401/ADuM6402/ADuM6403/ADuM6404

REGULATORY INFORMATION

The ADuM6400/ADuM6401/ADuM6402/ADuM6403/ADuM6404 are approved by the organizations listed in Table 15. Refer to Table 20

and the Insulation Lifetime section for more information about the recommended maximum working voltages for specific cross-insulation

waveforms and insulation levels.

Table 15.

UL 1

Recognized under UL 1577 component

recognition program

Single protection, 5000 V rms isolation

voltage

File E214100

CSA (Pending)

Approved under CSA Component Acceptance Notice #5A

Basic insulation per CSA 60950-1-07 and IEC 60950-1,

600 V rms (848 V peak) maximum working voltage

RW-16 package:

Reinforced insulation per CSA 60950-1-07 and IEC 60950-1,

380 V rms (537 V peak) maximum working voltage

Reinforced insulation per IEC 60601-1, 125 V rms (176 V peak)

maximum working voltage

RI-16-1 package:

Reinforced insulation per CSA 60950-1-07 and IEC 60950-1,

400 V rms (565 V peak) maximum working voltage

Reinforced insulation per IEC 60601-1, 250 V rms (353 V peak)

maximum working voltage

File 205078

VDE

RW-16 package:2

Certified according to IEC 60747-5-2

(VDE 0884 Part 2):2003-01 (pending)

Basic insulation, 846 V peak

RI-16-1 package:3

Certified according to DIN V VDE V

0884-10 (VDE V 0884-10):2006-12

Reinforced insulation, 846 V peak

File 2471900-4880-0001

1 In accordance with UL 1577, each ADuM6400/ADuM6401/ADuM6402/ADuM6403/ADuM6404 is proof-tested by applying an insulation test voltage ≥ 6000 V rms for

1 sec (current leakage detection limit = 20 μA).

2 In accordance with IEC 60747-5-2 (VDE 0884 Part 2):2003-01, each ADuM6400/ADuM6401/ADuM6402/ADuM6403/ADuM6404 in the RW-16 package is proof-tested

by applying an insulation test voltage ≥ 1590 V peak for 1 sec (partial discharge detection limit = 5 pC). The asterisk (*) marking branded on the component designates

IEC 60747-5-2 (VDE 0884 Part 2):2003-01 approval.

3 In accordance with DIN V VDE V 0884-10 (VDE V 0884-10):2006-12, each ADuM6400/ADuM6401/ADuM6402/ADuM6403/ADuM6404 in the RI-16-1 package is proof-tested

by applying an insulation test voltage ≥ 1590 V peak for 1 sec (partial discharge detection limit = 5 pC). The asterisk (*) marking branded on the component designates

DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 approval.

INSULATION AND SAFETY-RELATED SPECIFICATIONS

Table 16.

Parameter

Rated Dielectric Insulation Voltage

Minimum External Air Gap (Clearance)

Symbol

L(I01)

Value

5000

8.0

Unit

V rms

mm

Minimum External Tracking (Creepage)

L(I02)

RW-16 Package

RI-16-1 Package

Minimum Internal Distance (Internal Clearance)

Tracking Resistance (Comparative Tracking Index) CTI

Material Group

7.6

mm

8.3

mm

0.017 min mm

>175

V

IIIa

Test Conditions/Comments

1-minute duration

Measured from input terminals to output terminals,

shortest distance through air

Measured from input terminals to output terminals,

shortest distance path along body

Distance through insulation

DIN IEC 112/VDE 0303, Part 1

Material Group (DIN VDE 0110, 1/89, Table 1)

Rev. A | Page 9 of 28

Share Link: