AUIPS6011 查看數據表（PDF） - International Rectifier
零件编号
产品描述 (功能)
生产厂家
AUIPS6011 Datasheet PDF : 17 Pages
| |||
AUIPS6011(S)(R)
Absolute Maximum Ratings
Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters
are referenced to Ground lead. Tj= -40°C..150°C, Vcc=6..35V (unless otherwise specified).
Symbol Parameter
Min. Max. Units
Vout
Maximum output voltage
Vcc-35 Vcc+0.3
Voffset
Maximum logic ground to load ground offset
Vcc-35 Vcc+0.3
Vin
Vcc max.
Maximum input voltage
Maximum Vcc voltage
-0.3 5.5
36
V
Vcc cont. Maximum continuous Vcc voltage
28
Vcc sc.
Maximum Vcc voltage with short circuit protection
24
Iin max.
Idg max.
Maximum IN current
Maximum diagnostic output current
-3
-3
10
10
mA
Vdg
Maximum diagnostic output voltage
-0.3 5.5
V
Maximum power dissipation (internally limited by thermal protection)
Pd
Rth=5°C/W AUIPS6011
Rth=40°C/W AUIPS6011S 1”sqrt. footprint
25
3.1
W
Rth=50°C/W AUIPS6011R 1”sqrt. footprint
2.5
Tj max.
Max. storage & operating temperature junction temperature
-40 150
°C
Tsoldering Soldering temperature (10 seconds)
300
°C
Thermal Characteristics
Symbol
Parameter
Rth1
Thermal resistance junction to ambient AUIPS6011 TO220 free air
Rth2
Thermal resistance junction to case AUIPS6011 TO220
Rth1
Rth2
Thermal resistance junction to ambient AUIPS6011S D²Pak std. footprint
Thermal resistance junction to ambient AUIPS6011S D²Pak 1” sqrt.
Footprint
Rth3
Thermal resistance junction to case AUIPS6011S D²Pak
Rth1
Thermal resistance junction to ambient AUIPS6011R D-Pak std. footprint
Rth2
Thermal resistance junction to ambient AUIPS6011R D-Pak 1” sqrt.
Footprint
Rth3
Thermal resistance junction to case AUIPS6011R D-Pak
Typ.
50
1.2
60
40
1.2
70
50
1.2
Max.
Units
°C/W
Recommended Operating Conditions
These values are given for a quick design. For operation outside these conditions, please consult the application notes.
Symbol
Parameter
Min. Max. Units
VIH
High level input voltage
4
5.5
VIL
Low level input voltage
0
0.9
Iout
Continuous drain current, Tambient=85°C, Tj=125°C, Vin=5V
Rth=5°C/W IPS6011
18
A
Rth=40°C/W IPS6011S 1” sqrt. footprint
6.3
Rth=50°C/W IPS6011R 1” sqrt. footprint
5.6
Rin
Recommended resistor in series with IN pin
4
10
Rdgs
Rdgp
Recommended resistor in series with DG pin for reverse battery protection 4
Recommended pull-up resistor for DG
4
20
20
k
Rol
Recommended pull-up resistor for open load detection
5
100
F max.
Max. switching frequency
0.3 kHz
www.irf.com
3
Share Link: 