MITSUBISHI IC’S
M35501FP
FLD (VFD) DIGIT EXPANDER
RESET CIRCUIT
To reset the controller, the RESET pin should be held at “L” for 2
µs or more. Reset is released when the RESET pin is returned to
“H” and the power source voltage is between 4.0 V and 5.5 V.
Notes1: Perform the reset release when CLK input signal is “L.”
2: When setting the number of digits by SEL signal, optional digit
counter is set to “0” by reset.
RESET
CLK
DIG0
DIG1
DIG2
DIG3
Fig. 11 Digit output waveform when reset signal is input
8