Data Sheet
Electrical Characteristics continued
TA = 25°C (if bold, TA = -40 to +85°C), Vs = +5V, -Vs = GND, Rf = Rg =2kΩ, RL = 2kΩ to VS/2, G = 2; unless otherwise
noted.
Symbol Parameter
Conditions
Min Typ Max Units
ISOURCE
ISINK
ISC
Output Current, Sourcing (1)
Output Current, Sinking (1)
Short Circuit Output Current (1)
20
40
mA
VIN+ = 1V, VIN- = 0V, +VS = 15V, VOUT = 2V
20
10
15
mA
VIN+ = 0V, VIN- = 1V, +VS = 15V, VOUT = 2V
5
VIN+ = 0V, VIN- = 1V, +VS = 15V, VOUT = 0.2V
12
50
μA
+VS = 15V
40
60
mA
Notes:
1. 100% tested at 25°C. (Limits over the full temperature range are guaranteed by design.)
2. The input common mode voltage of either input signal voltage should be kept > 0.3V at 25°C. The upper end of the common-mode voltage range is +VS - 1.5V at
25°C, but either or both inputs can go to +36V without damages, independent of the magnitude of VS.
©2011 CADEKA Microcircuits LLC
www.cadeka.com 5