■ External Connections
Refer to the Terminal Arrangement on page 3 and the Block Diagram on page 8 for external connections for each unit.
Example of connection to a PLC.
• Refer to the PLC operation manual before connecting the PLC.
• The number of wires can be reduced by using a PLC with dynamic outputs.
Static Output Unit
1. M7E-01@@P2 Positive Logic Model Use a PNP Transistor Output Unit for the PLC Output Unit.
Connected to C500-OD212 Transistor Output Unit
PLC
A to D,
OUT00 DP, LE
to 15
0V
0V
PLC Output Unit
(PNP Transistor
Output)
M7E
Custom IC
2. M7E-01@@N2 Negative Logic Model Use an NPN Transistor Output Unit for the PLC Output Unit.
Connected to C500-OD213 Transistor Output Unit
PLC
A to D,
OUT00 DP, LE
to 15
Custom IC
PLC Output Unit
(NPN transistor
output)
9