MC100LVE210(2006) 查看數據表（PDF） - ON Semiconductor
零件编号
产品描述 (功能)
生产厂家
MC100LVE210 Datasheet PDF : 8 Pages
| |||
MC100LVE210
Table 6. AC CHARACTERISTICS VCC = 3.3 V; VEE = 0.0 V or VCC = 0.0 V; VEE = −3.3 V (Note 8)
−40°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
fmax
Maximum Toggle Frequency
700
700
700
GHz
tPLH
Propagation Delay to Output
tPHL
IN (Differential) (Note 9) 475
IN (Single−Ended) (Note 10) 400
875 500
850 450
900 500
900 450
ps
900
900
tskew
Within−Device Skew (Note 11) Qa to Qb
Qa to Qa, Qb to Qb
Part−to−Part Skew (Diff)
50 75
50 75
200
50 75
30 50
200
50 75 ps
30 50
200
tJITTER Cycle−to−Cycle Jitter
<1
<1
<1
ps
VPP
Input Swing (Note 12)
500
1000 500
1000 500
1000 mV
tr/tf
Output Rise/Fall Time (20%−80%)
200
600 200
600 200
600 ps
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
8. VEE can vary ±0.3 V.
9. The differential propagation delay is defined as the delay from the crossing points of the differential input signals to the crossing point of the
differential output signals.
10. The single−ended propagation delay is defined as the delay from the 50% point of the input signal to the crossing point of the differential output
signals.
11. The within−device skew is defined as the worst case difference between any two similar delay paths within a single device.
12. VPP(min) is defined as the minimum input differential voltage which will cause no increase in the propagation delay. The VPP(min) is AC limited
for the LVE210 as a differential input as low as 50 mV will still produce full ECL levels at the output.
http://onsemi.com
5
Share Link: 