P6SMB10A 查看數據表（PDF） - Electronics Industry

零件编号

产品描述 (功能)

生产厂家

P6SMB10A

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VBR: 6.8 - 440 Volts PPK: 600 Watts

Electronics Industry 

TH97/10561QM

TW00/17276EM

IATF 0060636

SGS TH07/1033

P6SMB6.8A - P6SMB400A

SURFACE MOUNT TRANSIENT

VOLTAGE SUPPRESSOR

VBR : 6.8 - 440 Volts

PPK : 600 Watts

FEATURES :

* 600W surge capability at 1ms

* Excellent clamping capability

* Low zener impedance

* Fast response time : typically less

then 1.0 ps from 0 volt to VBR(min.)

* Typical IR less then 1μA above 10V

* Pb / RoHS Free

SMB (DO-214AA)

2.0 ± 0.1

1.1 ± 0.3

3.6 ± 0.15

2.3 ± 0.2

0.22 ± 0.07

MECHANICAL DATA

* Case : SMB Molded plastic

* Epoxy : UL94V-O rate flame retardant

* Lead : Lead Formed for Surface Mount

* Polarity : Color band denotes cathode end except Bipolar.

* Mounting position : Any

* Weight : 0.093 grams

Dimensions in millimeters

DEVICES FOR BIPOLAR APPLICATIONS

For Bi-directional use CA Suffix

Electrical characteristics apply in both directions

MAXIMUM RATINGS

Rating at 25 °C ambient temperature unless otherwise specified.

Rating

Peak Power Dissipation at Ta = 25ºC, Tp=1ms (Note1)

Steady State Power Dissipation at TL = 75 °C

Peak Forward Surge Current, 8.3ms Single Half

Sine-Wave Superimposed on Rated Load

(JEDEC Method) (Note 3)

Operating and Storage Temperature Range

Symbol

PPK

PD

IFSM

TJ, TSTG

Notes:

(1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1

(2) Mounted on copper Lead area at 5.0 mm2 ( 0.013 mm thick ).

(3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per Minutes maximum.

Page 1 of 3

Value

Minimum 600

5.0

Unit

Watts

Watts

100

- 55 to + 150

Amps.

°C

Rev. 04 : March 31, 2008

Share Link: