DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

PI6C103L 查看數據表(PDF) - Pericom Semiconductor

零件编号
产品描述 (功能)
生产厂家
PI6C103L
Pericom-Semiconductor
Pericom Semiconductor Pericom-Semiconductor
PI6C103L Datasheet PDF : 12 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
PI6C103
1122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899P0011r22e3344c55i66s77i88o9900n1122C1122l33o4455c66k7788S9900y1122n33t44h5566e77s8899i00z11e22r3344f55o6677r8899M001122o11b2233i44l55e6677P88C990011s22
Power Management Timing
Signal
Signal State
Latency
No. of rising edges of free running PCICLK
CPU_STOP#
0 (disabled)
1
1 (enabled)
1
PCI_STOP#
0 (disabled)
1
1 (enabled)
1
PWR_DWN# 1 (normal operation)
3ms
0 (power down)
2 max.
Notes:
1. Clock on/off latency is defined as the number of rising edges of free running PCICLKs
between when the clock disable goes low/high to when the first valid clock comes out of
the device.
2. Power-up latency is from when PWR_DWN# goes inactive (HIGH) to when the first valid
clocks are driven from the device.
CPU_STOP# is an input signal used to turn off the CPU clocks for low power operation. CPU_STOP# is asserted asynchronously
by the external clock control logic with the rising edge of free running PCI clock and is internally synchronized to the external
PCICLK_Foutput. All other clocks continue to run while the CPU clocks are disabled. The CPU clocks are always stopped in a low
state and started guaranteeing that the high pulse width is a full pulse. CPU clock on latency is 2 or 3 CPU clocks and CPU clock
off latency is 2 or 3 CPU clocks.
CPUCLK
(Internal)
CPUCLK
(Internal)
PCICLK_F
(Free-running)
CPU_STOP#
PCI_STOP#
PWR_DWN#
CPUCLK
(External)
CPU_STOP# Timing Diagram
Notes:
1. All timing is referenced to the CPUCLK.
2. The Internal label means inside the chip and is a reference only. This in fact may not be the way that the
control is designed.
3 CPU_STOP# is an input signal that must be made synchronous to the free running PCI_F.
4. ON/OFF latency shown in the diagram is 2 CPU clocks.
5. All other clocks continue to run undisturbed.
6. PWR_DWN# , PCI_STOP# are shown in a high state.
7. Diagrams shown with respect to 66 MHz. Similar operation as CPU = 100 MHz.
225
PS8315-2 04/08/99

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]