Q67100-H6486 查看數據表（PDF） - Siemens AG

零件编号

产品描述 (功能)

生产厂家

Q67100-H6486

Data Communications ICs

Siemens AG 

General Information

The SAB 82525 is a High-Level Serial Communication Controller compatible to the SAB 82520

HSCC with extended features and functionality (HSCX).

The SAB 82526 is pin and software compatible to the SAB 82525, realizing one HDLC channel

(channel B).

The HSCX has been designed to implement high-speed communication links using HDLC

protocols and to reduce the hardware and software overhead needed for serial synchronous

communications.

Due to its 8-bit demultiplexed adaptive bus interface it fits perfectly into every Siemens/Intel or

Motorola 8- or 16-bit microcontroller or microprocessor system. The data through-put from/to

system memory is optimized transferring blocks of data (usually 32 bytes) by means of DMA

or interrupt request. Together with the storing capacity of up to 64 bytes in on-chip FIFO’s, the

serial interfaces are effectively decoupled from the system bus which drastically reduces the

dynamic load and reaction time of the CPU.

The HSCX directly supports the X.25 LAPB, the ISDN LAPD, and SDLC (normal response

mode) protocols and is capable of handling a large set of layer-2 protocol functions

independently from the host processor.

Furthermore, the HSCX opens a wide area for applications which use time division multiplex

methods (e.g. time-slot oriented PCM systems, systems designed for packet switching, ISDN

applications) by its programmable telecom-specific features.

The HSCX is fabricated using Siemens advanced ACMOS 3 technology and available in a

P-LCC-44 pin package.

The data link controller handles all functions necessary to establish and maintain an HDLC

data link, such as

– Flag insertion and detection,

– Bit stuffing,

– CRC generation and checking,

– Address field recognition.

Associated with each serial channel is a set of independent command and status registers

(SP-REG) and 64-byte deep FIFO’s for transmit and receive direction.

DMA capability has been added to the HSCX by means of a 4-channel DMA interface

(SAB 82525) with one DMA request line for each transmitter and receiver of both channels.

General

Advanced CMOS technology

Low power consumption: active 25 mW at 4 MHz

standby 4 mW

Semiconductor Group

5

Share Link: