TISP3072F3SL 查看數據表（PDF） - Power Innovations Ltd
零件编号
产品描述 (功能)
生产厂家
TISP3072F3SL Datasheet PDF : 16 Pages
| |||
TISP3072F3, TISP3082F3
DUAL SYMMETRICAL TRANSIENT
VOLTAGE SUPPRESSORS
MARCH 1994 - REVISED SEPTEMBER 1997
description (Continued)
The small-outline 8-pin assignment has been carefully chosen for the TISP series to maximise the inter-pin
clearance and creepage distances which are used by standards (e.g. IEC950) to establish voltage withstand
ratings.
absolute maximum ratings
RATING
Repetitive peak off-state voltage (0°C < TJ < 70°C)
‘3072F3
‘3082F3
Non-repetitive peak on-state pulse current (see Notes 1, 2 and 3)
1/2 µs (Gas tube differential transient, open-circuit voltage wave shape 1/2 µs)
2/10 µs (FCC Part 68, open-circuit voltage wave shape 2/10 µs)
8/20 µs (ANSI C62.41, open-circuit voltage wave shape 1.2/50 µs)
10/160 µs (FCC Part 68, open-circuit voltage wave shape 10/160 µs)
5/200 µs (VDE 0433, open-circuit voltage wave shape 2 kV, 10/700 µs)
0.5/310 µs (RLM 88, open-circuit voltage wave shape 1.5 kV, 0.5/700 µs)
5/310 µs (CCITT IX K17/K20, open-circuit voltage wave shape 2 kV, 10/700 µs)
5/310 µs (FTZ R12, open-circuit voltage wave shape 2 kV, 10/700 µs)
10/560 µs (FCC Part 68, open-circuit voltage wave shape 10/560 µs)
10/1000 µs (REA PE-60, open-circuit voltage wave shape 10/1000 µs)
Non-repetitive peak on-state current (see Notes 2 and 3)
D Package
50 Hz, 1 s
P Package
SL Package
Initial rate of rise of on-state current, Linear current ramp, Maximum ramp value < 38 A
Junction temperature
Storage temperature range
SYMBOL
VDRM
ITSP
ITSM
diF/dt
TJ
Tstg
VALUE
± 58
± 66
UNIT
V
120
80
70
60
50
38
50
50
45
35
4
6
6
250
-40 to +150
-40 to +150
A
A rms
A/µs
°C
°C
NOTES: 1. Further details on surge wave shapes are contained in the Applications Information section.
2. Initially the TISP must be in thermal equilibrium with 0°C < TJ <70°C. The surge may be repeated after the TISP returns to its initial
conditions.
3. Above 70°C, derate linearly to zero at 150°C lead temperature.
electrical characteristics for the T and R terminals, TJ = 25°C
IDRM
ID
Coff
PARAMETER
Repetitive peak off-
state current
Off-state current
Off-state capacitance
TEST CONDITIONS
VD = ±2VDRM, 0°C < TJ < 70°C
VD = ±50 V
f = 100 kHz, Vd = 100 mV VD = 0,
Third terminal voltage = -50 V to +50 V
(see Notes 4 and 5)
D Package
P Package
SL Package
TISP3072F3 TISP3082F3
MIN MAX MIN MAX
±10
±10
±10
±10
50† 150 50† 150
65† 200 65† 200
30† 100 30† 100
UNIT
µA
µA
fF
NOTES: 4. These capacitance measurements employ a three terminal capacitance bridge incorporating a guard circuit. The third terminal is
connected to the guard terminal of the bridge.
5. Further details on capacitance are given in the Applications Information section.
† Typical value of the parameter, not a limit value.
electrical characteristics for the T and G or the R and G terminals, TJ = 25°C
PARAMETER
Repetitive peak off-
IDRM state current
TEST CONDITIONS
VD = ±VDRM, 0°C < TJ < 70°C
TISP3072F3
MIN MAX
±10
TISP3082F3
MIN MAX
±10
UNIT
µA
PRODUCT INFORMATION
2
Share Link: 